[1.21.1][Neoforge] Accumulator can't receive power alone

[ffuentesm]

Minecraft Version

1.21.1

Immersive Engineering Version

ImmersiveEngineering-1.21.1-12.0.0-182

Expected Behavior

Placing an accumulator on top of a thermal generator should charge the accumulator from below.

Actual Behavior

The accumulator does not receive power unless is connected to a machine.

Steps to reproduce

I have a working generator, I then placed the accumulator on top of it and placed the energy input at the bottom.

I also tried a connector on the accumulator and nothing happened.

Debug Crash Log

https://pastebin.com/ZTX0uvBa

[malte0811]

Can you check whether you see the accumulators charging with a multimeter instead of the WAILA/etc overlay?

[ffuentesm]

I checked with both.
The accumulator seems sporadic. It charges and stops charging at weird times. It's not reliable.
It might start charging when I have it connected on both ends, but if I break it and place it back, it will no longer change.
Then if I give it a block update it will start charging.

[Rarity1]

My accumulators ONLY charge from the top. And they charge from the top regardless of what the top face is set to

[ffuentesm]

I am now having problems when the wire passes through a relay. I am using HV wires, connections, and relays.
The accumulator was working when it had a direct Connector to Connector input, but now that I have a relay to merge all 4 thermal generators, I receive no power

[ffuentesm]

It seems that the accumulator needs to be "updated." The above setup seems to work only when I restart the game. If I change anything in the setup, I need to restart the game so the accumulator can work again.

It's really frustrating having to re-join a world every time I break an accumulator.
The accumulator does not accept energy from the energy pipe unless I rejoin the world.