T-Display-AMOLED-1.75 diagram error

[nikthefix]

The diagram on the products website shows the boot and reset buttons labelled wrongly.
The labels should be switched.

Suggestion for future similar dev boards:

Please break out the boot and reset pins to the headers so that when mounted to an expansion board or mounted in an enclosure we still get easy access to boot / reset functionality. This would be good for USB too.
Also, a rear facing USB C receptacle (like on the T-Encoder-Pro) would e more practical for panel mounting.

Thanks
nik

[Llgok]

@nikthefix
Hello, I have checked and indeed, the BOOT button and the reset button are labeled incorrectly on the official website's store. I have already informed the relevant person in charge to make the necessary changes. Thank you for pointing this out. It is a great suggestion to bring out the BOOT pin and the reset pin to a socket, but the expansion socket is already full and cannot accommodate additional pins. If you are making a casing, you can use soldered jumper wires to install the BOOT button and the reset button onto the back panel of the casing.