LED status is only available, when Opt. reset mode in Web console setup is set to led (which is the default)
No power to DCHDMI or FPGA configuration is corrupt.
If the FPGA configuration has been corrupted, just wait for 2 minutes, as it will be reflashed by the ESP.
No clock from Dreamcast.
Check connection to VCLK
No proper sync signal is detected (It's normal to see this at startup/reset)
Check connections to VSYNC and HSYNC
Dreamcast clock and sync signals are fine, no cable plugged into HDMI port.
Plug in HDMI cable or replace with another cable
Normal operation.
Indicates video test pattern generation when in test jig. The generate_on console command does not trigger this status.
