how to install wireguard in kcptube?

[linnuxx]

.

[cnbatch]

The destination_address is the address that kcptube will be connected to.

Please try to modify the configuration like this

homepc>wgclient:
[Interface]
PrivateKey = key
Address = 192.168.168.10/24
MTU = 1300
#DNS = 1.1.1.1
[Peer]
PublicKey = key
AllowedIPs = 192.168.168.9/24
#Connect to Local 51820, this port will be listened by kcptube client mode
Endpoint = 127.0.0.1:51820
PersistentKeepalive = 20

vps>wgserver:
[Interface]
PrivateKey = key
ListenPort = 51820
Address = 192.168.168.9/24
MTU = 1300
[Peer]
PublicKey = key
AllowedIPs = 192.168.168.10/24
AllowedIPs = 192.168.0.10/24
AllowedIPs = 192.168.0.0/24
AllowedIPs = 192.168.1.0/24
PersistentKeepalive = 20

homepc:
mode=client
kcp=regular3
inbound_bandwidth=500M
outbound_bandwidth=50M
#kcptube should listen on 51820, so the wireguard client can connect to this port.
listen_port=51820

#this is the port of server side's kcptube
destination_port=59000
destination_address=ipvps
encryption_password=qwerty1234
encryption_algorithm=AES-GCM

vps:
mode=server
kcp=regular3
inbound_bandwidth=1G
outbound_bandwidth=1G
#Listening on 59000
listen_port=59000

#The port number of server side's wireguard
destination_port=51820

#if wireguard and kcptube are running on the same server, use localhost, or 127.0.0.1, or ::1
destination_address=localhost
encryption_password=qwerty1234
encryption_algorithm=AES-GCM

[cnbatch]

Duplicate discussion of #20