Remote Thermostat for CW400

[Halbamy]

Hi,

I'm struggeling to get a "remote thermostat" to work. I have a CW400 installed.
The correct way would be to use a RC 100 (RF). But I cannot choose this one. Wich one should I choose?

Thanks.

[proddy]

which version of EMS-ESP are you on?

[Halbamy]

3.6.5

[Halbamy]

I tried RC200 so far. Remote Temperatur is set vie MQTT but then currtemp for hc1 disappears.

{ "datetime": "30.09.2024 11:38", "intoffset": 0.0, "floordry": "off", "dampedoutdoortemp": 13.7, "floordrytemp": 0, "building": "medium", "minexttemp": -10, "damping": "on", "wwmode": "own prog", "wwcircmode": "off", "wwchargeduration": 15, "wwcharge": "off", "wwextra1": 0, "wwdisinfecting": "off", "wwdisinfectday": "su", "wwdisinfecttime": 60, "hc1": { "seltemp": 18.0, "haclimate": "selTemp", "mode": "manual", "modetype": "comfort", "ecotemp": 16.0, "manualtemp": 18.0, "comforttemp": 18.0, "summertemp": 17, "designtemp": 50, "offsettemp": 0, "minflowtemp": 35, "maxflowtemp": 55, "roominfluence": 3, "roominflfactor": 3.8, "curroominfl": 0.0, "nofrostmode": "room", "nofrosttemp": 5, "targetflowtemp": 23, "heatingtype": "radiator", "summersetmode": "winter", "summermode": "winter", "controlmode": "weather compensated", "program": "prog 1", "tempautotemp": -1.0, "remoteseltemp": 0.0, "fastheatup": 0, "switchonoptimization": "on", "reducemode": "room", "noreducetemp": -31, "reducetemp": 0, "wwprio": "off", "coolingon": "on", "hpmode": "heating", "control": "RC200", "remotetemp": 20.0 } }

[proddy]

any chance you could try with firmware version 3.7.0 which is in dev? I know Michael made some more improvements to the remote thermostat code

[Halbamy]

Yes. Maybe it's worth a try. I noticed that the remote thermostat did not popup in the device list on the ems-esp webpage

[Halbamy]

I had some time to test the latest dev release and it seems that the remote thermostat is workung. at least I can see the remote temperature in the HA climate instance.