main.tex

\documentclass[conference]{IEEEtran}
%\usepackage[spanish]{babel}
% http://nokyotsu.com/latex/acentos.html El paquete inputenc permite incluir
% los caracteres con tilde. En el enlace se dan mas detalles al respecto.
\usepackage[utf8]{inputenc}
% *** MISC UTILITY PACKAGES ***
%
%\usepackage{ifpdf}
% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional
% compilation based on whether the output is pdf or dvi.
% usage:
% \ifpdf
%   % pdf code
% \else
%   % dvi code
% \fi
% The latest version of ifpdf.sty can be obtained from:
% http://www.ctan.org/pkg/ifpdf
% Also, note that IEEEtran.cls V1.7 and later provides a builtin
% \ifCLASSINFOpdf conditional that works the same way.
% When switching from latex to pdflatex and vice-versa, the compiler may
% have to be run twice to clear warning/error messages.






% *** CITATION PACKAGES ***
%
%\usepackage{cite}
% cite.sty was written by Donald Arseneau
% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package
% \cite{} output to follow that of the IEEE. Loading the cite package will
% result in citation numbers being automatically sorted and properly
% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
% \cite will automatically add leading space, if needed. Use cite.sty's
% noadjust option (cite.sty V3.8 and later) if you want to turn this off
% such as if a citation ever needs to be enclosed in parenthesis.
% cite.sty is already installed on most LaTeX systems. Be sure and use
% version 5.0 (2009-03-20) and later if using hyperref.sty.
% The latest version can be obtained at:
% http://www.ctan.org/pkg/cite
% The documentation is contained in the cite.sty file itself.






% *** GRAPHICS RELATED PACKAGES ***
%
\ifCLASSINFOpdf
  % \usepackage[pdftex]{graphicx}
  % declare the path(s) where your graphic files are
  % \graphicspath{{../pdf/}{../jpeg/}}
  % and their extensions so you won't have to specify these with
  % every instance of \includegraphics
  % \DeclareGraphicsExtensions{.pdf,.jpeg,.png}
\else
  % or other class option (dvipsone, dvipdf, if not using dvips). graphicx
  % will default to the driver specified in the system graphics.cfg if no
  % driver is specified.
  % \usepackage[dvips]{graphicx}
  % declare the path(s) where your graphic files are
  % \graphicspath{{../eps/}}
  % and their extensions so you won't have to specify these with
  % every instance of \includegraphics
  % \DeclareGraphicsExtensions{.eps}
\fi
% graphicx was written by David Carlisle and Sebastian Rahtz. It is
% required if you want graphics, photos, etc. graphicx.sty is already
% installed on most LaTeX systems. The latest version and documentation
% can be obtained at: 
% http://www.ctan.org/pkg/graphicx
% Another good source of documentation is "Using Imported Graphics in
% LaTeX2e" by Keith Reckdahl which can be found at:
% http://www.ctan.org/pkg/epslatex
%
% latex, and pdflatex in dvi mode, support graphics in encapsulated
% postscript (.eps) format. pdflatex in pdf mode supports graphics
% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure
% that all non-photo figures use a vector format (.eps, .pdf, .mps) and
% not a bitmapped formats (.jpeg, .png). The IEEE frowns on bitmapped formats
% which can result in "jaggedy"/blurry rendering of lines and letters as
% well as large increases in file sizes.
%
% You can find documentation about the pdfTeX application at:
% http://www.tug.org/applications/pdftex





% *** MATH PACKAGES ***
%
%\usepackage{amsmath}
% A popular package from the American Mathematical Society that provides
% many useful and powerful commands for dealing with mathematics.
%
% Note that the amsmath package sets \interdisplaylinepenalty to 10000
% thus preventing page breaks from occurring within multiline equations. Use:
%\interdisplaylinepenalty=2500
% after loading amsmath to restore such page breaks as IEEEtran.cls normally
% does. amsmath.sty is already installed on most LaTeX systems. The latest
% version and documentation can be obtained at:
% http://www.ctan.org/pkg/amsmath





% *** SPECIALIZED LIST PACKAGES ***
%
%\usepackage{algorithmic}
% algorithmic.sty was written by Peter Williams and Rogerio Brito.
% This package provides an algorithmic environment fo describing algorithms.
% You can use the algorithmic environment in-text or within a figure
% environment to provide for a floating algorithm. Do NOT use the algorithm
% floating environment provided by algorithm.sty (by the same authors) or
% algorithm2e.sty (by Christophe Fiorio) as the IEEE does not use dedicated
% algorithm float types and packages that provide these will not provide
% correct IEEE style captions. The latest version and documentation of
% algorithmic.sty can be obtained at:
% http://www.ctan.org/pkg/algorithms
% Also of interest may be the (relatively newer and more customizable)
% algorithmicx.sty package by Szasz Janos:
% http://www.ctan.org/pkg/algorithmicx




% *** ALIGNMENT PACKAGES ***
%
%\usepackage{array}
% Frank Mittelbach's and David Carlisle's array.sty patches and improves
% the standard LaTeX2e array and tabular environments to provide better
% appearance and additional user controls. As the default LaTeX2e table
% generation code is lacking to the point of almost being broken with
% respect to the quality of the end results, all users are strongly
% advised to use an enhanced (at the very least that provided by array.sty)
% set of table tools. array.sty is already installed on most systems. The
% latest version and documentation can be obtained at:
% http://www.ctan.org/pkg/array


% IEEEtran contains the IEEEeqnarray family of commands that can be used to
% generate multiline equations as well as matrices, tables, etc., of high
% quality.




% *** SUBFIGURE PACKAGES ***
%\ifCLASSOPTIONcompsoc
%  \usepackage[caption=false,font=normalsize,labelfont=sf,textfont=sf]{subfig}
%\else
%  \usepackage[caption=false,font=footnotesize]{subfig}
%\fi
% subfig.sty, written by Steven Douglas Cochran, is the modern replacement
% for subfigure.sty, the latter of which is no longer maintained and is
% incompatible with some LaTeX packages including fixltx2e. However,
% subfig.sty requires and automatically loads Axel Sommerfeldt's caption.sty
% which will override IEEEtran.cls' handling of captions and this will result
% in non-IEEE style figure/table captions. To prevent this problem, be sure
% and invoke subfig.sty's "caption=false" package option (available since
% subfig.sty version 1.3, 2005/06/28) as this is will preserve IEEEtran.cls
% handling of captions.
% Note that the Computer Society format requires a larger sans serif font
% than the serif footnote size font used in traditional IEEE formatting
% and thus the need to invoke different subfig.sty package options depending
% on whether compsoc mode has been enabled.
%
% The latest version and documentation of subfig.sty can be obtained at:
% http://www.ctan.org/pkg/subfig




% *** FLOAT PACKAGES ***
%
%\usepackage{fixltx2e}
% fixltx2e, the successor to the earlier fix2col.sty, was written by
% Frank Mittelbach and David Carlisle. This package corrects a few problems
% in the LaTeX2e kernel, the most notable of which is that in current
% LaTeX2e releases, the ordering of single and double column floats is not
% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a
% single column figure to be placed prior to an earlier double column
% figure.
% Be aware that LaTeX2e kernels dated 2015 and later have fixltx2e.sty's
% corrections already built into the system in which case a warning will
% be issued if an attempt is made to load fixltx2e.sty as it is no longer
% needed.
% The latest version and documentation can be found at:
% http://www.ctan.org/pkg/fixltx2e


%\usepackage{stfloats}
% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e
% the ability to do double column floats at the bottom of the page as well
% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in
% LaTeX2e). It also provides a command:
%\fnbelowfloat
% to enable the placement of footnotes below bottom floats (the standard
% LaTeX2e kernel puts them above bottom floats). This is an invasive package
% which rewrites many portions of the LaTeX2e float routines. It may not work
% with other packages that modify the LaTeX2e float routines. The latest
% version and documentation can be obtained at:
% http://www.ctan.org/pkg/stfloats
% Do not use the stfloats baselinefloat ability as the IEEE does not allow
% \baselineskip to stretch. Authors submitting work to the IEEE should note
% that the IEEE rarely uses double column equations and that authors should try
% to avoid such use. Do not be tempted to use the cuted.sty or midfloat.sty
% packages (also by Sigitas Tolusis) as the IEEE does not format its papers in
% such ways.
% Do not attempt to use stfloats with fixltx2e as they are incompatible.
% Instead, use Morten Hogholm'a dblfloatfix which combines the features
% of both fixltx2e and stfloats:
%
% \usepackage{dblfloatfix}
% The latest version can be found at:
% http://www.ctan.org/pkg/dblfloatfix




% *** PDF, URL AND HYPERLINK PACKAGES ***
%
%\usepackage{url}
% url.sty was written by Donald Arseneau. It provides better support for
% handling and breaking URLs. url.sty is already installed on most LaTeX
% systems. The latest version and documentation can be obtained at:
% http://www.ctan.org/pkg/url
% Basically, \url{my_url_here}.




% *** Do not adjust lengths that control margins, column widths, etc. ***
% *** Do not use packages that alter fonts (such as pslatex).         ***
% There should be no need to do such things with IEEEtran.cls V1.6 and later.
% (Unless specifically asked to do so by the journal or conference you plan
% to submit to, of course. )



\begin{document}
%
% paper title
% Titles are generally capitalized except for words such as a, an, and, as,
% at, but, by, for, in, nor, of, on, or, the, to and up, which are usually
% not capitalized unless they are the first or last word of the title.
% Linebreaks \\ can be used within to get better formatting as desired.
% Do not put math or special symbols in the title.
\title{An updated performance evaluation of container-based virtualization technologies}


% author names and affiliations
% use a multiple column layout for up to three different
% affiliations
\author{
\IEEEauthorblockN{Maria Aguiar}
\IEEEauthorblockA{Universidad del Valle\\
Email: maria.aguiar@correounivalle.edu.co}
\and
\IEEEauthorblockN{Cristian Ballesteros}
\IEEEauthorblockA{Universidad del Valle\\
Email: cristian.ballesteros@correounivalle.edu.co}
\and
\IEEEauthorblockN{Alejandro Bravo}
\IEEEauthorblockA{Universidad ICESI\\
Email: 1061816906@icesi.edu.co}
\and
\IEEEauthorblockN{Santiago Giraldo}
\IEEEauthorblockA{Universidad del Valle\\
Email: giraldo.santiago@correounivalle.edu.co}
\and
\IEEEauthorblockN{Johan Mera}
\IEEEauthorblockA{Universidad del Valle\\
Email: johan.millan@correounivalle.edu.co}
\and
\IEEEauthorblockN{Orlando Montenegro}
\IEEEauthorblockA{Universidad del Valle\\
Email: orlando.montenegro@correounivalle.edu.co}
\and
\IEEEauthorblockN{Kenneth Puliche}
\IEEEauthorblockA{Universidad del Valle\\
Email: kenneth.puliche@correounivalle.edu.co}
\and
\IEEEauthorblockN{Pavel Zambrano}
\IEEEauthorblockA{Universidad del Valle\\
Email: xxxxx.xxxxxxxxxx@correounivalle.edu.co}
\and
\IEEEauthorblockN{John Sanabria}
\IEEEauthorblockA{Universidad del Valle\\
Email: john.sanabria@correounivalle.edu.co}
}

\maketitle

\input{abstract}
\input{introduccion}

\input{trabajo-relacionado}

\input{intro-despliegue}
  \input{despliegue/docker}
  \input{despliegue/lxc}
  \input{despliegue/coreos}
  \input{despliegue/baremetal}

\input{benchmarking}

\input{entorno-pruebas}

\input{resultados}

\input{trabajo-futuro}

\input{conclusiones}
% references section

% can use a bibliography generated by BibTeX as a .bbl file
% BibTeX documentation can be easily obtained at:
% http://mirror.ctan.org/biblio/bibtex/contrib/doc/
% The IEEEtran BibTeX style support page is at:
% http://www.michaelshell.org/tex/ieeetran/bibtex/
%\bibliographystyle{IEEEtran}
% argument is your BibTeX string definitions and bibliography database(s)
%\bibliography{IEEEabrv,../bib/paper}
%
% <OR> manually copy in the resultant .bbl file
% set second argument of \begin to the number of references
% (used to reserve space for the reference number labels box)
\begin{thebibliography}{1}

\bibitem{rad2017introduction}
Rad, B., Bhatti, H. \& Ahmadi, M. An introduction to docker and analysis of its performance.  {\em International Journal Of Computer Science And Network Security (ijcsns)}.  \textbf{17}, 228 (2017).

\bibitem{torrez2019hpc}
Torrez, A., Les, T. \& Priedhorsky, R. HPC container runtimes have minimal or no performance impact. {\em 2019 IEEE/ACM International Workshop on Containers and New Orchestration Paradigms for Isolated Environments in HPC (CANOPIE-HPC)}. \textbf{37--42}, (2019).

\bibitem{saransig2018performance}
Saransig, A. \& Tapia, F. Performance analysis of monolithic and micro service architectures--containers technology. {\em International Conference on Software Process Improvement}. \textbf{270--279}, (2018).

\bibitem{ruiz2015performance}
Ruiz, A. \& Jeanvoine, E. \& Nussbaum, L. Performance evaluation of containers for HPC. {\em European Conference on Parallel Processing}. \textbf{813--824}, (2015).


\bibitem{soltesz2007container}
Soltesz, S., P{\"o}tzl, H., Fiuczynski, M., Bavier, A. \& Peterson, L. Container-based operating system virtualization: a scalable, high-performance alternative to hypervisors. {\em Proceedings of the 2Nd ACM SIGOPS/EuroSys european conference on computer systems 2007}, \textbf{275--287}, (2007).


\bibitem{chae2019performance}
Chae, M., Lee, H. \& Lee, K. A performance comparison of linux containers and virtual machines using Docker and KVM.  {\em Cluster Computing}. 	extbf{22}, 1765--1775 (2019).


\bibitem{casalicchio2017measuring}
Casalicchio, E. \& Perciballi, V. Measuring docker performance: What a mess!!!. {\em Proceedings of the 8th ACM/SPEC on International Conference on Performance Engineering Companion}, \textbf{11--16} (2017).

\bibitem{kozhirbayev2017performance}
Kozhirbayev, Z. \& Sinnott, R. A performance comparison of container-based technologies for the cloud.  {\em Future Generation Computer Systems}. 	\textbf{68} pp. 175--182 (2017).

\bibitem{amaral2015performance}
Amaral, M., Polo, J., Carrera, D., Mohomed, I., Unuvar, M. \& Steinder, M. Performance evaluation of microservices architectures using containers. {\em 2015 IEEE 14th International Symposium on Network Computing and Applications} pp. 27--34 (2015).

\end{thebibliography}




% that's all folks
\end{document}