-
Notifications
You must be signed in to change notification settings - Fork 102
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
a lot of errormasseges in the log file Register 59 and 219 #312
Comments
Both Cloud and Sunsynk are fighting for the same serial port. Solarman dongle is not doing any session management and every time both Cloud and Sunsynk are asking something they are tipping on each others toes. If you disable cloud connectivity, it gets a bit better. Ultimately I suggest to use RS485 cable. |
Thank you, can there something happen on this errors? Or can it run normaly, I have try one year to get data out of the inverter with cable i wara happy fir this integration |
You can ignore the errors. It works but sunsynk sometimes hangs and Solarman dongle also sometimes hangs. I finaly gave up and installed a cable, some others have done the same. There are probably not very many sunsynk users using the Solarman dongle. |
Thank you verry much, does you have please spezific information from usb to deye rs485? I tried many times to get Esp32 to rs485 geting working for me without success so i wars verry happy after one year of trying to find this with the dongle. And in austria you dont get nothing ready to use items |
https://kellerza.github.io/sunsynk/guide/deployment-options lists multiple options. I'm using 4th without mbusd. Easyest would be to use option 1 or 4 and have USB RS485 dongle directly connected to the machine running sunsynk. You can get USB RS485 adapter very cheap from eg AliEx..., search for "usb rs485". These ~2EUR adapters work for sure. |
Thank you @rixxxx ,
|
Yes, as long as
Change the driver - https://kellerza.github.io/sunsynk/reference/multi-options#driver solarman to pymodbus |
Thank you thank you, i will try it in the nex week i think a lot of work for me. |
Hello everyone, Apparently I'm the only one who really can't get it right. Yesterday I connected the Waveshare rs485-usb adapter to the Deye 5ksg03lp1 and was immediately fired up because it worked straight away. But there has only been radio silence on the USB for 2 hours since then and no more data is being sent. I have now switched back to the WiFi dongle so that I at least have data. What did I do wrong again this time? `12:04:02 INFO ############################################################ `
dies habe ich im addon als verbindung angegeben I'm slowly getting desperate. I wanted to get away from the dongle but it doesn't seem to be as easy as I imagined. Thank you again for your help and greetings from Austria |
Thanks again for your help, I changed it and then values come, not all of them but some come. I don't know why it just doesn't work for me. I'll just have to live with the dongle error because it's just unstable. In any case, it makes me cry, anything that is faster than a donkey is no longer for me |
Existing sensor definitions can be found here
You Inverter Deye5kSg03LP1
Details about your Inverter: make/model/firmware
Deye 5ksg03lp1
Protokoll-Version:V0.2.0.1NETZ:3384-1515HMI:0000-C367Lithium-Akku-Versionsnummer:V0.0.0.0Deutsche Version:FFFFSpanische Version:FFFFUngarische Version:FFFFItalienische Version:FFFFLCD-Typ:8100
Describe the issue/bug and what you expect
Hello, I haven't been here long, and homeassistant is very powerful, the integration of Solarman Yellow with mqtt works very well. I looked through the logs and there were a lot of errors
A clear and concise description of what the bug is.
Any suggestions on proposed registers is welcome.
Logs (if applicable)
The text was updated successfully, but these errors were encountered: