openchain.yaml

---
###############################################################################
#
#    CLI section
#
###############################################################################
cli:

    # The address that the cli process will use for callbacks from chaincodes
    address: 0.0.0.0:30304



###############################################################################
#
#    REST section
#
###############################################################################
rest:

    # Enable/disable setting for the REST service. It is recommended to disable
    # REST service on validators in production deployment and use non-validating
    # nodes to host REST service
    enabled: true

    # The address that the REST service will listen on for incoming requests.
    address: 0.0.0.0:5000


###############################################################################
#
#    LOGGING section
#
###############################################################################
logging:

    # Valid logging levels are case-insensitive strings chosen from

    #     CRITICAL | ERROR | WARNING | NOTICE | INFO | DEBUG

    # Logging 'module' names are also strings, however valid module names are
    # defined at runtime and are not checked for validity during option
    # processing.

    # Default logging levels are specified here for each of the obc-peer
    # commands. For commands that have subcommands, the defaults also apply to
    # all subcommands of the command. These logging levels can be overridden
    # on the command line using the --logging-level command-line option, or by
    # setting the OPENCHAIN_LOGGING_LEVEL environment variable.

    # The logging level specification is of the form

    #     [<module>[,<module>...]=]<level>[:[<module>[,<module>...]=]<level>...]

    # A logging level by itself is taken as the overall default. Otherwise,
    # overrides for individual or groups of modules can be specified using the
    # <module>[,<module>...]=<level> syntax.

    # Examples:
    #   info                                       - Set default to INFO
    #   warning:main,db=debug:chaincode=info       - Override default WARNING in main,db,chaincode
    #   chaincode=info:main=debug:db=debug:warning - Same as above
    peer:      info
    crypto:    info
    status:    warning
    stop:      warning
    login:     warning
    vm:        warning
    chaincode: warning


###############################################################################
#
#    Peer section
#
###############################################################################
peer:

    # Peer Version following version semantics as described here http://semver.org/
    # The Peer supplies this version in communications with other Peers
    version:  0.1.0

    # The Peer id is used for identifying this Peer instance.
    id: jdoe

    # The privateKey to be used by this peer
    # privateKey: 794ef087680e2494fa4918fd8fb80fb284b50b57d321a31423fe42b9ccf6216047cea0b66fe8365a8e3f2a8140c6866cc45852e63124668bee1daa9c97da0c2a

    # The networkId allows for logical seperation of networks
    # networkId: dev
    # networkId: test
    networkId: dev

    Dockerfile:  |
        from golang:1.6
        # Install RocksDB
        RUN cd /opt  && git clone --branch v4.1 --single-branch --depth 1 https://github.com/facebook/rocksdb.git && cd rocksdb
        WORKDIR /opt/rocksdb
        RUN make shared_lib
        ENV LD_LIBRARY_PATH=/opt/rocksdb:$LD_LIBRARY_PATH
        RUN apt-get update && apt-get install -y libsnappy-dev zlib1g-dev libbz2-dev
        # Copy GOPATH src and install Peer
        COPY src $GOPATH/src
        RUN mkdir -p /var/openchain/db
        WORKDIR $GOPATH/src/github.com/openblockchain/obc-peer/
        RUN CGO_CFLAGS="-I/opt/rocksdb/include" CGO_LDFLAGS="-L/opt/rocksdb -lrocksdb -lstdc++ -lm -lz -lbz2 -lsnappy" go install && cp $GOPATH/src/github.com/openblockchain/obc-peer/openchain.yaml $GOPATH/bin

    # The Address this Peer will listen on
    listenAddress: 0.0.0.0:30303
    # The Address this Peer will bind to for providing services
    address: 0.0.0.0:30303
    # Whether the Peer should programmatically determine the address to bind to.
    # This case is useful for docker containers.
    addressAutoDetect: false

    # Peer port to accept connections on
    port:    30303
    # Peer's setting for GOMAXPROCS
    gomaxprocs: 2
    workers: 2

    # Sync related configuration
    sync:
        blocks:
            # Channel size for readonly SyncBlocks messages channel for receiving
            # blocks from oppositie Peer Endpoints.
            # NOTE: currently messages are not stored and forwarded, but rather
            # lost if the channel write blocks.
            channelSize: 10
        state:
            snapshot:
                # Channel size for readonly syncStateSnapshot messages channel
                # for receiving state deltas for snapshot from oppositie Peer Endpoints.
                # NOTE: currently messages are not stored and forwarded, but
                # rather lost if the channel write blocks.
                channelSize: 50
            deltas:
                # Channel size for readonly syncStateDeltas messages channel for
                # receiving state deltas for a syncBlockRange from oppositie
                # Peer Endpoints.
                # NOTE: currently messages are not stored and forwarded,
                # but rather lost if the channel write blocks.
                channelSize: 20

    # Validator defines whether this peer is a validating peer or not, and if
    # it is enabled, what consensus plugin to load
    validator:
        enabled: true

        # Consensus plugin to use. The value is the name of the plugin, e.g. obcpbft, noops
        # if the given value is not recognized, we will default to noops
        consensus: noops

        events:
            # The address that the Event service will be enabled on the validator
            address: 0.0.0.0:31315

            # total number of events that could be buffered without blocking the
            # validator sends
            buffersize: 100

            # milliseconds timeout for producer to send an event.
            # if < 0, if buffer full, unblocks immediately and not send
            # if 0, if buffer full, will block and guarantee the event will be sent out
            # if > 0, if buffer full, blocks till timeout
            timeout: 10
        # Setting the validity-period.verification to false will disable the verification
        # of the validity period in the validator
        validity-period:
            verification: false

    # TLS Settings for p2p communications
    tls:
        enabled:  false
        cert:
            file: testdata/server1.pem
        key:
            file: testdata/server1.key
        # The server name use to verify the hostname returned by TLS handshake
        server-host-override:

    # PKI member services properties
    pki:
        eca:
            paddr: localhost:50051
        tca:
            paddr: localhost:50051
        tlsca:
            paddr: localhost:50051
        tls:
            enabled: false
            rootcert:
                file: tlsca.cert
            # The server name use to verify the hostname returned by TLS handshake
            server-host-override:

    # Peer discovery settings.  Controls how this peer discovers other peers
    discovery:

        # The root nodes are used for bootstrapping purposes, and generally
        # supplied through ENV variables
        rootnode:

        # The duration of time between attempts to asks peers for their connected peers
        period:  5s

        ## leaving this in for example of sub map entry
        # testNodes:
        #    - node   : 1
        #      ip     : 127.0.0.1
        #      port   : 30303
        #    - node   : 2
        #      ip     : 127.0.0.1
        #      port   : 30303

        # Should the discovered nodes and their reputations
        # be stored in DB and persisted between restarts
        persist:    true

        # if peer discovery is off
        # the peer window will show
        # only what retrieved by active
        # peer [true/false]
        enabled:    true

        # number of workers that
        # tastes the peers for being
        # online [1..10]
        workers: 8

        # the period in seconds with which the discovery
        # tries to reconnect to successful nodes
        # 0 means the nodes are not reconnected
        touchPeriod: 600

        # the maximum nuber of nodes to reconnect to
        # -1 for unlimited
        touchMaxNodes: 100

    # Path on the file system where peer will store data
    fileSystemPath: /var/openchain/production

###############################################################################
#
#    VM section
#
###############################################################################
vm:

    # Endpoint of the vm management system.  For docker can be one of the following in general
    # unix:///var/run/docker.sock
    # http://localhost:4243
    # tcp://localhost:2376
    endpoint: unix:///var/run/docker.sock

    # settings for docker vms
    docker:
        tls:
            enabled: false
            cert:
                file: /path/to/server.pem
            ca:
                file: /path/to/ca.pem
            key:
                file: /path/to/server-key.pem

###############################################################################
#
#    Chaincode section
#
###############################################################################
chaincode:

    # The id is used by the Chaincode stub to register the executing Chaincode
    # ID with the Peerand is generally supplied through ENV variables
    # the Path form of ID is provided when deploying the chaincode. The name is
    # used for all other requests. The name is really a hashcode
    # returned by the system in response to the deploy transaction. In
    # development mode where user runs the chaincode, the name can be any string
    id:
        path:
        name:

    golang:

        # This is the basis for the Golang Dockerfile.  Additional commands will
        # be appended depedendent upon the chaincode specification.
        Dockerfile:  |
            from golang:1.6
            COPY src $GOPATH/src
            WORKDIR $GOPATH

    # timeout in millisecs for starting up a container and waiting for Register
    # to come through. 1sec should be plenty for chaincode unit tests
    startuptimeout: 1000

    #timeout in millisecs for deploying chaincode from a remote repository.
    deploytimeout: 30000

    #mode - options are "dev", "net"
    #dev - in dev mode, user runs the chaincode after starting validator from
    # command line on local machine
    #net - in net mode validator will run chaincode in a docker container

    mode: net

    installpath: /go/bin/

###############################################################################
#
#    Ledger section - ledger configuration encompases both the blockchain
#    and the state
#
###############################################################################
ledger:

  blockchain:

    # Define the genesis block
    genesisBlock:

      # Deploy chaincodes into the genesis block
      # chaincode:
      #     path: github.com/openblockchain/obc-peer/openchain/example/chaincode/chaincode_example01
      #     type: GOLANG
      #     constructor:
      #       func: init
      #       args:
      #         - alice
      #         - "4"
      #         - bob
      #         - "10"

    # Setting the deploy-system-chaincode property to false will prevent the
    # deploying of system chaincode at genesis time.
    deploy-system-chaincode: false

  state:

    # Control the number state deltas that are maintained. This takes additional
    # disk space, but allow the state to be rolled backwards and forwards
    # without the need to replay transactions.
    deltaHistorySize: 500

    # The data structure in which the state will be stored. Different data
    # structures may offer different performance characteristics. Options are
    # 'buckettree' and 'trie'. If not set, the default data structure is the
    # 'buckettree'. This CANNOT be changed after the DB has been created.
    dataStructure:
      # The name of the data structure is for storing the state
      name: buckettree
      # The data structure specific configurations
      configs:
        # configurations for 'bucketree'. These CANNOT be changed after the DB
        # has been created. 'numBuckets' defines the number of bins that the
        # state key-values are to be divided
        numBuckets: 10009
        # 'maxGroupingAtEachLevel' defines the number of bins that are grouped
        #together to construct next level of the merkle-tree (this is applied
        # repeatedly for constructing the entire tree).
        maxGroupingAtEachLevel: 10

        # configurations for 'trie'
        # 'tire' has no additional configurations exposed as yet


###############################################################################
#
#    Security section - Applied to all entities (client, NVP, VP)
#
###############################################################################
security:
    # Enable security will force every entity on the network to enroll with obc-ca
    # and maintain a valid set of certificates in order to communicate with
    # other peers
    enabled: false
    # To enroll NVP or VP with obc-ca. These parameters are for 1 time use.
    # They will not be valid on subsequent times without un-enroll first.
    # The values come from off-line registration with obc-ca. For testing, make
    # sure the values are in obc-ca/obcca.yaml file eca.users
    enrollID: binhn
    enrollSecret: 7avZQLwcUe9q
    # To enable privacy of transactions (requires security to be enabled). This
    # encrypts the transaction content during transit and at rest. The state
    # data is also encrypted
    privacy: false

    # Can be 256 or 384. If you change here, you have to change also
    # the same property in obcca.yaml to the same value
    level: 256

    # TCerts related configuration
    tcert:
      batch:
        # The size of the batch of TCerts
        size:  200