My own custom-config keymaps for zmk-corne

[duanexavierbondad]

Summary

It took me three days of experimentations and learning the in's and out's of ZMK and Miryoku but here we are now. First wireless build. Been using a custom made corne with QMK for about a year and a half now, trained to learn colemakdh usually an hour a day for 1 month until it is on my muscle memory. Now transitioning on Miryoku Layout to train on the symbols and numbers and layers. Throw in the transition to a wireless build with ZMK.

• Miryoku Implementations

  • Miryoku QMK
  • Miryoku ZMK
  • Miryoku KMonad
  • Miryoku KMK

• Features

  • Layers

    • Substitute Layer
    • Add Layer
    • Remove Layer
    • Change Layer Display Name

  • Change Mapping

    • All Layers
    • Per Layer

  • Changes

    • Updated ColemakDH to have the semicolon ( ; ), Put single qoute [ ' ] on the Number Layer and double quotes [ " ] on the Symbol Layer.
    • Swap positions of Tab and Space | Swap positions of Backspace and Enter. Applied to BASE, TAP, and BASE_QWERTY layers
    • Added a Valorant Gaming Layer for Left side.

  • Future Experimentations

    • enable mouse emulation since there are still errors on my build when adding the #define MIRYOKU_KLUDGE_MOUSEKEYSPR. It is unable to fine the #include <behaviors/mouse_move.dtsi> | No such file or directory. Will update this once I am able to rebuild.
    • LED underglows: It seems I am unable to run underglows with miryoku even in the QMK firmware when I tried to flash it.

  custom_config.h

[manna-harbour]

Thanks for sharing your config!

Now transitioning on Miryoku Layout to train on the symbols and numbers and layers.

Consider drilling numbers and symbols on monkeytype.

enable mouse emulation since there are still errors on my build when adding the #define MIRYOKU_KLUDGE_MOUSEKEYSPR. It is unable to fine the #include <behaviors/mouse_move.dtsi> | No such file or directory. Will update this once I am able to rebuild.

You also need to specify a branch containing the mousekeys PR. See https://github.com/manna-harbour/miryoku_zmk#mousekeys-pr.

LED underglows: It seems I am unable to run underglows with miryoku even in the QMK firmware when I tried to flash it.

For ZMK and QMK you'll need to enable RGB in the build configuration.

For ZMK see https://github.com/manna-harbour/miryoku_zmk#kconfig-configuration. For QMK see the Custom Hardware Support section at #85.