You might notice there are protusion on the body, those are for capacitive touch sensor that was left unfinished. You can edit them out and export the files yourself in fusion 360 project file: pjdcontrollerv26.f3z (be warn: its pretty messy) or used the already edited out version provided.
| File Name | Amount |
|---|---|
| mainleft.stl | 1 |
| mainleftmid.stl | 1 |
| mainright.stl | 1 |
| mainrightmid.stl | 1 |
| bottomleft.stl | 1 |
| bottommid.stl | 1 |
| bottomright.stl | 1 |
| plateback.stl | 1 |
| platefront.stl | 1 |
| screwconnectorbinder.stl | 6 |
| sliderplateright.stl | 2 |
| sliderplateleft.stl.stl | 2 |
for the main body you can use (noslider) version without needing the sliderplate[left/right].stl
| Part | Amount |
|---|---|
| M2x8 Screws | a lot |
| Wires | a lot |
| Cheap USB Game Controller | 1 |
| 1 cm Push Button | 6 |
| 10 cm Push Button | 4 |
| USB C Connector Board | 1 |
| Rocker Switch | 1 (Optional if you want to turn off Button LED) |