- System Version: 20240401
- Download Link: https://github.com/sipeed/LicheeRV-Nano-Build/releases
- Reference Installation Document: https://github.com/sipeed/LicheeRV-Nano-Build/releases
- Sipeed M1s Dock
- A Type-C cable
Download and extract the precompiled image:
wget https://dl.sipeed.com/fileList/MAIX/M1s/M1s_Dock/7_Firmware/m1sdock_linux_20221116.zip
unzip m1sdock_linux_20221116.zip
Connect the computer and the UART-labeled C port using the Type-C cable.
Download the flashing tool and use the appropriate version for your system to flash the firmware.
After powering on, press and hold the boot button, then press the reset button, and finally release the boot button.
Enter the MCU page, and flash m0 and d0 (files named low_load_bl808_m0/[email protected]) at address 0x58000000, with group set to group0. Ensure to select the high serial port!
Next, enter the IOT page, check the Single Download Options box, fill in the start address with the address in the filename, and flash the whole_img file.
Connect the Type-C cable to the UART-labeled C port.
The system should start normally with serial output.
The system started successfully, with serial output.
--------Start Local Services--------
********************************
********************************
Linux login: root
login[40]: root login on 'ttyS0'
Processing /etc/profile ...
Set search library path in /etc/profile
Set user path in /etc/profile
id: unknown ID 0
Welcome to Linux
[@Linux root]#uname -a
Linux Linux 5.10.4 #4 SMP Fri Nov 4 18:23:30 CST 2022 riscv64 GNU/Linux
[@Linux root]#cat /proc/cpuinfo
processor : 0
hart : 0
isa : rv64imafdcvsu
mmu : sv39
model name : T-HEAD C910
freq : 1.2GHz
icache : 64kB
dcache : 64kB
l2cache : 2MB
tlb : 1024 4-ways
cache line : 64Bytes
address sizes : 40 bits physical, 39 bits virtual
vector version : 0.7.1
[@Linux root]#
Screen recording (entering the system):
Successful: The actual result matches the expected result.
Failed: The actual result does not match the expected result.
Test successful.