README.md

RevyOS Meles Version Test Report

Test Environment

Operating System Information

• System Version: root-meles-20231210_134926.ext4.tar.gz
• Download Link: https://github.com/milkv-meles/meles-images/releases
• Reference Installation Document: https://milkv.io/zh/docs/meles/getting-started/boot

Hardware Information

• Milk-V Meles 4GB/8GB
• eMMC module > 16GB
• A USB A to C cable
• Optional: A USB-TTL Debugger
• Optional: Keyboard, monitor, mouse (for graphical interface testing)

Installation Steps

Flashing Image using fastboot onto the Development Board

Download the system image and U-Boot SPL from GitHub release.

U-Boot with SPL version selection:

• 4GB Version -> u-boot-with-spl-singlerank.bin
• 8GB Version -> u-boot-with-spl-dualrank.bin

Press and hold the download button near the GPIO interface on the development board and connect the board to the computer.

Check connection status:

$ lsusb | grep T-HEAD
Bus 001 Device 045: ID 2345:7654 T-HEAD USB download gadget

Next, use fastboot to flash the image.

If fastboot doesn't recognize the device or you encounter flashing issues, check the device connection and try running fastboot as a privileged user (sudo).

fastboot flash ram u-boot-with-spl-dualrank.bin
fastboot reboot
fastboot flash uboot u-boot-with-spl-dualrank.bin
fastboot flash boot boot.ext4
tar xvf root-meles-20231210_134926.ext4.tar.gz
fastboot flash root root-meles-20231210_134926.ext4

Logging into the System

Logging into the system via serial port or graphical interface.

Default Username: debian Default Password: debian

Expected Results

The system should boot up normally and allow login through the serial port.

Actual Results

CFT

Boot Information

CFT

Test Criteria

Successful: The actual result matches the expected result.

Failed: The actual result does not match the expected result.

Test Conclusion

CFT