diff --git a/BPI-F3/Alpine/README.md b/BPI-F3/Alpine/README.md new file mode 100644 index 0000000..9bbbb5e --- /dev/null +++ b/BPI-F3/Alpine/README.md @@ -0,0 +1,288 @@ +--- +sys: alpine +sys_ver: edge +sys_var: null + +status: basic +last_update: 2024-12-10 +--- + +# Alpine Banana Pi BPI-F3 Test Report + +## Test Environment + +### System Information + +- Download Link: https://dev.alpinelinux.org/~mps/riscv64/ +- Reference Installation Document: https://docs.banana-pi.org/en/BPI-F3/GettingStarted_BPI-F3 + +### Hardware Information + +- Banana Pi BPI-F3 +- Power Adapter +- A microSD Card +- A USB to UART Debugger + +## Installation Steps + +### Flashing the Image (SD Card) + +After downloading and extracting the image, use `dd` to flash the image to the microSD card. + +```bash +xz -kd bpi-f3-mmc.img.xz +sudo dd if=/path/to/bpi-f3-mmc.img of=/dev/your-device bs=1M status=progress +``` + +### Logging into the System + +Logging into the system via the serial port. + +[press ENTER to login] + +## Expected Results + +The system should boot up normally and allow login through the onboard serial port. + +## Actual Results + +The system booted successfully and login through the onboard serial port was also successful. + +### Boot Log + +Screen recording (From flashing image to system login): +[![asciicast](https://asciinema.org/a/g8t5bdrkncNvAKxkhTEP95W5b.svg)](https://asciinema.org/a/g8t5bdrkncNvAKxkhTEP95W5b) + +```log +Welcome to Alpine Linux 3.21.0_alpha20240807 (edge) +Kernel 6.6.36-2-bpi-f3 on an riscv64 (ttyS0) + +Welcome to Alpine! + +The Alpine Wiki contains a large amount of how-to guides and general +information about administrating Alpine systems. +See . + +You can setup the system with the command: setup-alpine + +localhost:~# uname -a +Linux localhost 6.6.36-2-bpi-f3 #3-Alpine SMP Wed, 18 Sep 2024 13:41:15 +0000 riscv64 Linux + +localhost:~# cat /etc/os-release +NAME="Alpine Linux" +ID=alpine +VERSION_ID=3.21.0_alpha20240807 +PRETTY_NAME="Alpine Linux edge" +HOME_URL="https://alpinelinux.org/" +BUG_REPORT_URL="https://gitlab.alpinelinux.org/alpine/aports/-/issues" + +localhost:~# cat /proc/cpuinfo +processor : 0 +hart : 0 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +processor : 1 +hart : 1 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +processor : 2 +hart : 2 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +processor : 3 +hart : 3 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +processor : 4 +hart : 4 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +processor : 5 +hart : 5 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +processor : 6 +hart : 6 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +processor : 7 +hart : 7 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +localhost:~# setup-alpine + + + ALPINE LINUX INSTALL +---------------------- + + Hostname +---------- +Enter system hostname (fully qualified form, e.g. 'foo.example.org') [localhost] + + Interface +----------- +Available interfaces are: eth0 eth1 ip6tnl0 sit0 tunl0. +Enter '?' for help on bridges, bonding and vlans. +Which one do you want to initialize? (or '?' or 'done') [eth0] +Ip address for eth0? (or 'dhcp', 'none', '?') [dhcp] +Available interfaces are: eth1 ip6tnl0 sit0 tunl0. +Enter '?' for help on bridges, bonding and vlans. +Which one do you want to initialize? (or '?' or 'done') [eth1] done +Do you want to do any manual network configuration? (y/n) [n] +[ 182.914702] priv phy_interface = 9 +[ 183.008444] emac_phy_connect: eth0: attached to PHY (UID 0x1cc916) Link = 0 +[ 183.035905] k1x_emac cac80000.ethernet eth0: registered PTP clock +udhcpc: started, v1.36.1 +udhcpc: broadcasting discover +udhcpc: broadcasting discover +[ 187.145641] k1x_emac cac80000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off +udhcpc: broadcasting discover +udhcpc: broadcasting select for 192.168.5.221, server 192.168.5.1 +udhcpc: lease of 192.168.5.221 obtained from 192.168.5.1, lease time 43200 + + Root Password +--------------- +Changing password for root +New password: +Bad password: too short +Retype password: +passwd: password for root changed by root + + Timezone +---------- +Africa/ Egypt Iran Poland +America/ Eire Israel Portugal +Antarctica/ Etc/ Jamaica ROC +Arctic/ Europe/ Japan ROK +Asia/ Factory Kwajalein Singapore +Atlantic/ GB Libya Turkey +Australia/ GB-Eire MET UCT +Brazil/ GMT MST US/ +CET GMT+0 MST7MDT UTC +CST6CDT GMT-0 Mexico/ Universal +Canada/ GMT0 NZ W-SU +Chile/ Greenwich NZ-CHAT WET +Cuba HST Navajo Zulu +EET Hongkong PRC leap-seconds.list +EST Iceland PST8PDT posixrules +EST5EDT Indian/ Pacific/ + +Which timezone are you in? [UTC] + + * WARNING: clock skew detected! + * Stopping local ... [ ok ] + * Stopping System Message Bus ... [ ok ] + * Seeding random number generator ... + * Saving 256 bits of creditable seed for next boot [ ok ] + * WARNING: clock skew detected! + * Starting busybox acpid ... [ ok ] + * Starting chronyd ... [ ok ] + * Setting system clock using the hardware clock [UTC] ... [ ok ] + * Starting busybox syslog ... [ ok ] + * Starting busybox crond ... [ ok ] + * Starting System Message Bus ... [ ok ] + * Starting local ... [ ok ] + + Proxy +------- +HTTP/FTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none] + + Network Time Protocol +----------------------- +Sat Jan 1 00:03:24 UTC 2000 +Which NTP client to run? ('busybox', 'openntpd', 'chrony' or 'none') [chrony] + * rc-update: chronyd already installed in runlevel `default'; skipping + * WARNING: chronyd has already been started + + APK Mirror +------------ + (f) Find and use fastest mirror + (s) Show mirrorlist + (r) Use random mirror + (e) Edit /etc/apk/repositories with text editor + (c) Community repo enable + (skip) Skip setting up apk repositories + +Enter mirror number or URL: [1] + + (f) Find and use fastest mirror + (s) Show mirrorlist + (r) Use random mirror + (e) Edit /etc/apk/repositories with text editor + (c) Community repo enable + (skip) Skip setting up apk repositories + +Enter mirror number or URL: [1] skip + + + User +------ +Setup a user? (enter a lower-case loginname, or 'no') [no] +Which ssh server? ('openssh', 'dropbear' or 'none') [openssh] +Allow root ssh login? ('?' for help) [prohibit-password] +Enter ssh key or URL for root (or 'none') [none] + * service sshd added to runlevel default +ssh-keygen: generating new host keys: RSA ECDSA ED25519 + * Starting sshd ... [ ok ] + + Disk & Install +---------------- +Available disks are: + mmcblk2 (15.6 GB ) + +Which disk(s) would you like to use? (or '?' for help or 'none') [none] +findfs: unable to resolve 'LABEL=APKOVL' +Enter where to store configs ('floppy', 'usb' or 'none') [none] +Enter apk cache directory (or '?' or 'none') [/var/cache/apk] + +``` + +## Test Criteria + +Successful: The actual result matches the expected result. + +Failed: The actual result does not match the expected result. + +## Test Conclusion + +Test successful. diff --git a/BPI-F3/Alpine/README_zh.md b/BPI-F3/Alpine/README_zh.md new file mode 100644 index 0000000..74cb1a3 --- /dev/null +++ b/BPI-F3/Alpine/README_zh.md @@ -0,0 +1,279 @@ +# Alpine 香蕉派 BPI-F3 测试报告 + +## 测试环境 + +### 系统信息 + +- 下载链接：https://dev.alpinelinux.org/~mps/riscv64/ +- 参考安装文档：https://docs.banana-pi.org/en/BPI-F3/GettingStarted_BPI-F3 + +### 硬件信息 + +- 香蕉派 BPI-F3 +- 电源适配器 +- microSD 卡一张 +- USB to UART 调试器一个 + +## 安装步骤 + +### 刷写镜像（sd 卡） + +下载并解压镜像后，使用 `dd` 将镜像写入 microSD 卡。 + +```bash +xz -kd bpi-f3-mmc.img.xz +sudo dd if=/path/to/bpi-f3-mmc.img of=/dev/your-device bs=1M status=progress +``` + +### 登录系统 + +通过串口登录系统。 + +显示：[press ENTER to login] 后按回车登录进入root用户 + +## 预期结果 + +系统正常启动，能够通过板载串口登录。 + +## 实际结果 + +系统正常启动，成功通过板载串口登录。 + +### 启动信息 + +屏幕录像（从刷写镜像到登录系统）： +[![asciicast](https://asciinema.org/a/g8t5bdrkncNvAKxkhTEP95W5b.svg)](https://asciinema.org/a/g8t5bdrkncNvAKxkhTEP95W5b) + +```log +Welcome to Alpine Linux 3.21.0_alpha20240807 (edge) +Kernel 6.6.36-2-bpi-f3 on an riscv64 (ttyS0) + +Welcome to Alpine! + +The Alpine Wiki contains a large amount of how-to guides and general +information about administrating Alpine systems. +See . + +You can setup the system with the command: setup-alpine + +localhost:~# uname -a +Linux localhost 6.6.36-2-bpi-f3 #3-Alpine SMP Wed, 18 Sep 2024 13:41:15 +0000 riscv64 Linux + +localhost:~# cat /etc/os-release +NAME="Alpine Linux" +ID=alpine +VERSION_ID=3.21.0_alpha20240807 +PRETTY_NAME="Alpine Linux edge" +HOME_URL="https://alpinelinux.org/" +BUG_REPORT_URL="https://gitlab.alpinelinux.org/alpine/aports/-/issues" + +localhost:~# cat /proc/cpuinfo +processor : 0 +hart : 0 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +processor : 1 +hart : 1 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +processor : 2 +hart : 2 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +processor : 3 +hart : 3 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +processor : 4 +hart : 4 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +processor : 5 +hart : 5 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +processor : 6 +hart : 6 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +processor : 7 +hart : 7 +model name : Spacemit(R) X60 +isa : rv64imafdcv_zicbom_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zfhmin_zca_zcd_zba_zbb_zbc_zbs_zkt_zve32f_zve32x_zve64d_zve64f_zve64x_zvfh_zvfhmin_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt +mmu : sv39 +mvendorid : 0x710 +marchid : 0x8000000058000001 +mimpid : 0x1000000049772200 + +localhost:~# setup-alpine + + + ALPINE LINUX INSTALL +---------------------- + + Hostname +---------- +Enter system hostname (fully qualified form, e.g. 'foo.example.org') [localhost] + + Interface +----------- +Available interfaces are: eth0 eth1 ip6tnl0 sit0 tunl0. +Enter '?' for help on bridges, bonding and vlans. +Which one do you want to initialize? (or '?' or 'done') [eth0] +Ip address for eth0? (or 'dhcp', 'none', '?') [dhcp] +Available interfaces are: eth1 ip6tnl0 sit0 tunl0. +Enter '?' for help on bridges, bonding and vlans. +Which one do you want to initialize? (or '?' or 'done') [eth1] done +Do you want to do any manual network configuration? (y/n) [n] +[ 182.914702] priv phy_interface = 9 +[ 183.008444] emac_phy_connect: eth0: attached to PHY (UID 0x1cc916) Link = 0 +[ 183.035905] k1x_emac cac80000.ethernet eth0: registered PTP clock +udhcpc: started, v1.36.1 +udhcpc: broadcasting discover +udhcpc: broadcasting discover +[ 187.145641] k1x_emac cac80000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off +udhcpc: broadcasting discover +udhcpc: broadcasting select for 192.168.5.221, server 192.168.5.1 +udhcpc: lease of 192.168.5.221 obtained from 192.168.5.1, lease time 43200 + + Root Password +--------------- +Changing password for root +New password: +Bad password: too short +Retype password: +passwd: password for root changed by root + + Timezone +---------- +Africa/ Egypt Iran Poland +America/ Eire Israel Portugal +Antarctica/ Etc/ Jamaica ROC +Arctic/ Europe/ Japan ROK +Asia/ Factory Kwajalein Singapore +Atlantic/ GB Libya Turkey +Australia/ GB-Eire MET UCT +Brazil/ GMT MST US/ +CET GMT+0 MST7MDT UTC +CST6CDT GMT-0 Mexico/ Universal +Canada/ GMT0 NZ W-SU +Chile/ Greenwich NZ-CHAT WET +Cuba HST Navajo Zulu +EET Hongkong PRC leap-seconds.list +EST Iceland PST8PDT posixrules +EST5EDT Indian/ Pacific/ + +Which timezone are you in? [UTC] + + * WARNING: clock skew detected! + * Stopping local ... [ ok ] + * Stopping System Message Bus ... [ ok ] + * Seeding random number generator ... + * Saving 256 bits of creditable seed for next boot [ ok ] + * WARNING: clock skew detected! + * Starting busybox acpid ... [ ok ] + * Starting chronyd ... [ ok ] + * Setting system clock using the hardware clock [UTC] ... [ ok ] + * Starting busybox syslog ... [ ok ] + * Starting busybox crond ... [ ok ] + * Starting System Message Bus ... [ ok ] + * Starting local ... [ ok ] + + Proxy +------- +HTTP/FTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none] + + Network Time Protocol +----------------------- +Sat Jan 1 00:03:24 UTC 2000 +Which NTP client to run? ('busybox', 'openntpd', 'chrony' or 'none') [chrony] + * rc-update: chronyd already installed in runlevel `default'; skipping + * WARNING: chronyd has already been started + + APK Mirror +------------ + (f) Find and use fastest mirror + (s) Show mirrorlist + (r) Use random mirror + (e) Edit /etc/apk/repositories with text editor + (c) Community repo enable + (skip) Skip setting up apk repositories + +Enter mirror number or URL: [1] + + (f) Find and use fastest mirror + (s) Show mirrorlist + (r) Use random mirror + (e) Edit /etc/apk/repositories with text editor + (c) Community repo enable + (skip) Skip setting up apk repositories + +Enter mirror number or URL: [1] skip + + + User +------ +Setup a user? (enter a lower-case loginname, or 'no') [no] +Which ssh server? ('openssh', 'dropbear' or 'none') [openssh] +Allow root ssh login? ('?' for help) [prohibit-password] +Enter ssh key or URL for root (or 'none') [none] + * service sshd added to runlevel default +ssh-keygen: generating new host keys: RSA ECDSA ED25519 + * Starting sshd ... [ ok ] + + Disk & Install +---------------- +Available disks are: + mmcblk2 (15.6 GB ) + +Which disk(s) would you like to use? (or '?' for help or 'none') [none] +findfs: unable to resolve 'LABEL=APKOVL' +Enter where to store configs ('floppy', 'usb' or 'none') [none] +Enter apk cache directory (or '?' or 'none') [/var/cache/apk] + +``` + +## 测试判定标准 + +测试成功：实际结果与预期结果相符。 + +测试失败：实际结果与预期结果不符。 + +## 测试结论 + +成功 diff --git a/BPI-F3/README.md b/BPI-F3/README.md index b21c90c..d43084d 100644 --- a/BPI-F3/README.md +++ b/BPI-F3/README.md @@ -21,16 +21,18 @@ cpu_core: SpacemiT X60 - Armbian(noble, desktopless) - Download Links: https://mirrors.tuna.tsinghua.edu.cn/armbian-releases/bananapif3/archive/Armbian_24.8.1_Bananapif3_noble_legacy_6.1.15_minimal.img.xz - Reference Installation Document: https://docs.banana-pi.org/en/BPI-F3/GettingStarted_BPI-F3 - - Fedora - Download Links: - Baidu Netdisk: https://pan.baidu.com/s/1EFcLInWYxLi032gmhueiWw?pwd=8888 - Google Drive: https://drive.google.com/file/d/1v-nHZA3AyFLaLRs6bt22XjIh7OVczI9d/view?usp=sharing - Reference Installation Document: https://docs.banana-pi.org/en/BPI-F3/GettingStarted_BPI-F3 - - OpenWrt - Download Links: https://archive.spacemit.com/openwrt/releases/bl-v2.0.y/targets/spacemit/DEVICE_debX/ - Reference Installation Document: https://bianbu-linux.spacemit.com/openwrt-docs/ +- Alpine + - Download Link: https://dev.alpinelinux.org/~mps/riscv64/ + - Reference Installation Document: https://docs.banana-pi.org/en/BPI-F3/GettingStarted_BPI-F3 + ### Hardware Information @@ -45,9 +47,11 @@ cpu_core: SpacemiT X60 | Armbian Image Boot (noble) | N/A | [Successful][Armbian_noble] | | Fedora Image Boot | N/A | [Successful][Fedora] | | OpenWrt Image Boot | N/A | [Successful][OpenWrt] | +| Alpine Image Boot | N/A | [Successful][Alpine] | [Bianbu]: ./Bianbu/README.md [Armbian_noble]: ./Armbian/README_noble.md [Armbian]: ./Armbian/README.md [Fedora]: ./Fedora/README.md [OpenWrt]: ./OpenWrt/README.md +[Alpine]: ./Alpine/README.md diff --git a/BPI-F3/README_zh.md b/BPI-F3/README_zh.md index f145cd6..e63ceb2 100644 --- a/BPI-F3/README_zh.md +++ b/BPI-F3/README_zh.md @@ -15,6 +15,17 @@ - Armbian(noble，无桌面) - 下载链接：https://mirrors.tuna.tsinghua.edu.cn/armbian-releases/bananapif3/archive/Armbian_24.8.1_Bananapif3_noble_legacy_6.1.15_minimal.img.xz - 参考安装文档：https://docs.banana-pi.org/en/BPI-F3/GettingStarted_BPI-F3 +- Fedora + - 下载链接: + - 百度网盘: https://pan.baidu.com/s/1EFcLInWYxLi032gmhueiWw?pwd=8888 + - 谷歌网盘: https://drive.google.com/file/d/1v-nHZA3AyFLaLRs6bt22XjIh7OVczI9d/view?usp=sharing + - 参考安装文档: https://docs.banana-pi.org/en/BPI-F3/GettingStarted_BPI-F3 +- OpenWrt + - 下载链接: https://archive.spacemit.com/openwrt/releases/bl-v2.0.y/targets/spacemit/DEVICE_debX/ + - 参考安装文档: https://bianbu-linux.spacemit.com/openwrt-docs/ +- Alpine + - 下载链接：https://dev.alpinelinux.org/~mps/riscv64/ + - 参考安装文档：https://docs.banana-pi.org/en/BPI-F3/GettingStarted_BPI-F3 ### 硬件开发板信息 @@ -27,7 +38,13 @@ | Bianbu 镜像启动 | N/A | [成功][Bianbu] | | Armbian 镜像启动 | N/A | [成功][Armbian] | | Armbian 镜像启动 (noble) | N/A | [成功][Armbian_noble] | +| Fedora 镜像启动 | N/A | [成功][Fedora] | +| OpenWrt 镜像启动 | N/A | [成功][OpenWrt] | +| Alpine 镜像启动 | N/A | [成功][Alpine] | [Bianbu]: ./Bianbu/README_zh.md [Armbian_noble]: ./Armbian/README_zh_noble.md -[Armbian]: ./Armbian/README_zh.md \ No newline at end of file +[Armbian]: ./Armbian/README_zh.md +[Fedora]: ./Fedora/README_zh.md +[OpenWrt]: ./OpenWrt/README_zh.md +[Alpine]: ./Alpine/README_zh.md \ No newline at end of file