suDROID - v2.0.ps1

# Set up logging
$LogFile = "rooting_process_$(Get-Date -Format 'yyyyMMdd_HHmmss').log"
Start-Transcript -Path $LogFile -Append

# Define colors for output
$RED = "`e[31m"
$GREEN = "`e[32m"
$YELLOW = "`e[33m"
$BLUE = "`e[34m"
$CYAN = "`e[36m"
$BOLD = "`e[1m"
$NC = "`e[0m"

# Starting message
Write-Host "${CYAN}${BOLD}Starting the Android Rooting Process... $(Get-Date -Format 'yyyy-MM-dd HH:mm:ss')${NC}"
Write-Host "${BLUE}================================================================================${NC}"

Write-Host @"
${RED}${BOLD}*******************************************************************************************************
IMPORTANT NOTICE: Rooting your Android device carries certain risks.
Make sure you understand the steps involved, proceed with caution, and ensure you have a backup of important data.
Connect your Android device to your computer via USB and make sure USB debugging is enabled.
This script is provided "as-is" without warranty. Use at your own risk.
*******************************************************************************************************${NC}
"@

# Confirmation prompt
do {
    $userInput = Read-Host "${CYAN}To proceed, type ${GREEN}Y${CYAN}. For help enabling USB debugging, type ${YELLOW}H${CYAN}. To exit, type ${RED}N${CYAN}.${NC}"
    switch ($userInput.ToUpper()) {
        "Y" { break }
        "H" {
            Write-Host "${CYAN}Follow these steps to enable USB debugging on your Android device:${NC}"
            Write-Host "${BLUE}1.${NC} Open 'Settings' on your device, go to 'About Phone', and tap 'Build number' seven times to unlock developer options."
            Write-Host "${BLUE}2.${NC} Go back to 'Settings' and select 'Developer options'."
            Write-Host "${BLUE}3.${NC} Enable 'USB debugging' and connect your device to your computer via USB."
        }
        "N" { exit }
        default { Write-Host "${RED}Invalid input. Please type Y, H, or N.${NC}" }
    }
} until ($userInput -match "^[YyNn]$")

# Error handler
function Handle-Error {
    Write-Host "${RED}Oops! Something went wrong during the process. Please check the log file for details: $LogFile${NC}"
    Stop-Transcript
    exit 1
}

# Environment setup function
function Setup-Environment {
    Write-Host "${YELLOW}Setting up environment for rooting...${NC}"
    if (-not (Test-Path "patching_process")) {
        New-Item -Path "patching_process" -ItemType Directory
    }
    Set-Location -Path "patching_process"

    Write-Host "${GREEN}Checking if adb and fastboot are installed...${NC}"
    if (-not (Get-Command adb -ErrorAction SilentlyContinue)) {
        Write-Host "${RED}adb not found. Please ensure it is installed and accessible in your PATH.${NC}"
        exit 1
    }
    if (-not (Get-Command fastboot -ErrorAction SilentlyContinue)) {
        Write-Host "${RED}fastboot not found. Please ensure it is installed and accessible in your PATH.${NC}"
        exit 1
    }
}

# Check device connection and bootloader status
function Check-Device {
    Write-Host "${CYAN}Checking device connection and bootloader status...${NC}"
    & adb wait-for-device

    $bootloaderStatus = (& adb shell getprop ro.boot.flash.locked).Trim()
    if ($bootloaderStatus -eq "1") {
        Write-Host "${RED}Your device's bootloader is locked.${NC}"
        $helpUnlock = Read-Host "Do you need help unlocking your bootloader? (y/n)"
        if ($helpUnlock -match "^[Yy]$") {
            $deviceBrand = (& adb shell getprop ro.product.brand).Trim()
            switch ($deviceBrand) {
                "xiaomi" { Write-Host "${YELLOW}For Xiaomi devices, visit the official Mi Unlock page to download the unlocking tool.${NC}" }
                "oneplus" { Write-Host "${YELLOW}For OnePlus devices, follow instructions on the official OnePlus support page.${NC}" }
                "samsung" { Write-Host "${YELLOW}Samsung USA devices typically require a Token. I can't help with this. Else If you are in Europe you can unlock it easily, just search online for your device root method${NC}" }
                "asus" { Write-Host "${YELLOW}ASUS provides an unlock tool; visit the official ASUS support page.${NC}" }
                "motorola" { Write-Host "${YELLOW}Motorola provides official unlock instructions; visit the Motorola support page.${NC}" }
                "google" { Write-Host "${YELLOW}Google Pixel devices can typically be unlocked via fastboot; run: fastboot flashing unlock${NC}" }
                default {
                    $chipVendor = (& adb shell getprop ro.hardware.chipname).Trim()
                    if ($chipVendor -match "mt") {
                        Write-Host "${CYAN}Detected MediaTek chipset. Try using the mtkclient tool for unlocking:https://github.com/bkerler/mtkclient?tab=readme-ov-file#windows${NC}"
                    } elseif ($chipVendor -match "unisoc") {
                        Write-Host "${CYAN}Detected Unisoc chipset. Use Hovatek's Identifier Token method:https://www.hovatek.com/forum/thread-32287.html, or CVE-2022-38691 on GitHub:https://github.com/TomKing062/CVE-2022-38694_unlock_bootloader.${NC}. If you are so lucky to have an engeneeing firmware for the device flash it and then you can flash GSIs without unlocking the bootloader but on A11 and before only, more info:https://adshnk.com/Jd4w9l"
                    } else {
                        Write-Host "${YELLOW}For other brands or chipsets, refer to official support, or search for device-specific unlock guides.${NC}"
                    }
                }
            }
            exit 1
        } else {
            Write-Host "${RED}Bootloader must be unlocked before proceeding. Exiting.${NC}"
            exit 1
        }
    } else {
        Write-Host "${GREEN}Device connected successfully and bootloader is unlocked.${NC}"
    }
}

# Flash patched boot image function
function Flash-PatchedImage {
    Write-Host "${CYAN}Copy the patched boot image to /storage/emulated/0/Download and rename it to boot.img.${NC}"
    Write-Host "${CYAN}Rebooting device to fastboot and flashing the patched boot image...${NC}"
    & adb reboot bootloader
    Start-Sleep -Seconds 15
    & fastboot flash boot boot.img
    Start-Sleep -Seconds 10
    & fastboot reboot
}

# Root method selection
Write-Host "${GREEN}Choose your root method:${NC}"
Write-Host "${GREEN}1. Magisk${NC}"
Write-Host "${GREEN}2. Apatch${NC}"
Write-Host "${GREEN}3. KernelSU${NC}"
$rootMethodChoice = Read-Host "Enter the number of your choice"

switch ($rootMethodChoice) {
    1 {
        Write-Host "${CYAN}You selected Magisk.${NC}"
        Write-Host "${YELLOW}Install the Magisk app, extract the boot image from your stock firmware, and follow in-app instructions to patch it.${NC}"
        Read-Host -Prompt "Press Enter when ready"
        Flash-PatchedImage
    }
    2 {
        Write-Host "${CYAN}You selected Apatch.${NC}"
        Write-Host "${YELLOW}Install the Apatch app, extract the boot image from your stock firmware, and follow in-app instructions to patch it.${NC}"
        Read-Host -Prompt "Press Enter when ready"
        Flash-PatchedImage
    }
    3 {
        Write-Host "${CYAN}You selected KernelSU.${NC}"
        Write-Host "${YELLOW}Download the appropriate KernelSU-patched boot image, and flash it using TWRP or fastboot.${NC}"
        Write-Host "${GREEN}1. From TWRP: flash the boot image directly."
        Write-Host "${GREEN}2. Via fastboot: Run 'adb reboot bootloader' and then 'fastboot flash boot boot.img'."
        Read-Host -Prompt "Press Enter when ready"
        Flash-PatchedImage
    }
    default {
        Write-Host "${RED}Invalid selection. Exiting.${NC}"
        exit 1
    }
}

# Execution of main functions
Setup-Environment
Check-Device
Stop-Transcript