automatically update translations

i18n/cs/docusaurus-plugin-content-docs/current/private-dns/connect-devices/mobile-and-desktop/linux.md

@@ -102,6 +102,28 @@ Pokud se zobrazí oznámení, že nejste připojeni k AdGuard DNS, je port, na k
 
 :::
 
+## Use EDNS (Extended DNS)
+
+EDNS extends the DNS protocol, enabling larger UDP packets to carry additional data. In AdGuard DNS, it allows passing DeviceID in plain DNS using an extra parameter.
+
+DeviceID, an eight-digit hexadecimal identifier (e.g., `1a2b3c4d`), helps link DNS requests to specific devices. For encrypted DNS, this ID is part of the domain (e.g., `1a2b3c4d.d.adguard-dns.com`). For unencrypted DNS, EDNS is required to transfer this identifier.
+
+AdGuard DNS uses EDNS to retrieve DeviceID by looking for option number `65074`. If such an option exists, it will read DeviceID from there. For this, you can use the `dig` command on the terminal:
+
+```sh
+dig @94.140.14.49 'www.example.com' A IN +ednsopt=65074:3031323334353637
+```
+
+Here, `65074` is the option ID, and `3031323334353637` is its value in hex format (DeviceID: `01234567`).
+
+Vše je hotovo! DeviceID should be displayed.
+
+:::note
+
+The `dig` command is merely an example, you can use any DNS software with an ability to add EDNS options to perform this action.
+
+:::
+
 ## Použití běžného DNS
 
 Pokud nechcete používat další software pro konfiguraci DNS, můžete se rozhodnout pro nešifrovaný DNS. Máte dvě možnosti: použít propojené IP adresy nebo vyhrazené IP adresy:

i18n/da/docusaurus-plugin-content-docs/current/private-dns/connect-devices/mobile-and-desktop/linux.md

@@ -102,6 +102,28 @@ Ses en notifikation om, at man ikke er forbundet til AdGuard DNS, er det mest sa
 
 :::
 
+## Use EDNS (Extended DNS)
+
+EDNS extends the DNS protocol, enabling larger UDP packets to carry additional data. In AdGuard DNS, it allows passing DeviceID in plain DNS using an extra parameter.
+
+DeviceID, an eight-digit hexadecimal identifier (e.g., `1a2b3c4d`), helps link DNS requests to specific devices. For encrypted DNS, this ID is part of the domain (e.g., `1a2b3c4d.d.adguard-dns.com`). For unencrypted DNS, EDNS is required to transfer this identifier.
+
+AdGuard DNS uses EDNS to retrieve DeviceID by looking for option number `65074`. If such an option exists, it will read DeviceID from there. For this, you can use the `dig` command on the terminal:
+
+```sh
+dig @94.140.14.49 'www.example.com' A IN +ednsopt=65074:3031323334353637
+```
+
+Here, `65074` is the option ID, and `3031323334353637` is its value in hex format (DeviceID: `01234567`).
+
+Færdig! DeviceID should be displayed.
+
+:::note
+
+The `dig` command is merely an example, you can use any DNS software with an ability to add EDNS options to perform this action.
+
+:::
+
 ## Brug almindelig DNS
 
 Foretrækker man ikke at bruge ekstra software til DNS-opsætning, kan der vælges ikke-krypteret DNS. Man har to valg: Brug linkede IP'er eller dedikerede IP'er:

i18n/de/docusaurus-plugin-content-docs/current/private-dns/connect-devices/mobile-and-desktop/linux.md

@@ -102,6 +102,28 @@ Wenn Sie eine Benachrichtigung sehen, dass Sie nicht mit AdGuard DNS verbunden s
 
 :::
 
+## Use EDNS (Extended DNS)
+
+EDNS extends the DNS protocol, enabling larger UDP packets to carry additional data. In AdGuard DNS, it allows passing DeviceID in plain DNS using an extra parameter.
+
+DeviceID, an eight-digit hexadecimal identifier (e.g., `1a2b3c4d`), helps link DNS requests to specific devices. For encrypted DNS, this ID is part of the domain (e.g., `1a2b3c4d.d.adguard-dns.com`). For unencrypted DNS, EDNS is required to transfer this identifier.
+
+AdGuard DNS uses EDNS to retrieve DeviceID by looking for option number `65074`. If such an option exists, it will read DeviceID from there. For this, you can use the `dig` command on the terminal:
+
+```sh
+dig @94.140.14.49 'www.example.com' A IN +ednsopt=65074:3031323334353637
+```
+
+Here, `65074` is the option ID, and `3031323334353637` is its value in hex format (DeviceID: `01234567`).
+
+Fertig! DeviceID should be displayed.
+
+:::note
+
+The `dig` command is merely an example, you can use any DNS software with an ability to add EDNS options to perform this action.
+
+:::
+
 ## Einfaches DNS verwenden
 
 Wenn Sie keine zusätzliche Software für die DNS-Konfiguration verwenden möchten, können Sie sich für unverschlüsseltes DNS entscheiden. Sie haben zwei Optionen: Verknüpfte IPs oder dedizierte IPs verwenden:

i18n/es/docusaurus-plugin-content-docs/current/private-dns/connect-devices/mobile-and-desktop/linux.md

@@ -102,6 +102,28 @@ Nota: Si ves una notificación que indica que no estás conectado a AdGuard DNS,
 
 :::
 
+## Use EDNS (Extended DNS)
+
+EDNS extends the DNS protocol, enabling larger UDP packets to carry additional data. In AdGuard DNS, it allows passing DeviceID in plain DNS using an extra parameter.
+
+DeviceID, an eight-digit hexadecimal identifier (e.g., `1a2b3c4d`), helps link DNS requests to specific devices. For encrypted DNS, this ID is part of the domain (e.g., `1a2b3c4d.d.adguard-dns.com`). For unencrypted DNS, EDNS is required to transfer this identifier.
+
+AdGuard DNS uses EDNS to retrieve DeviceID by looking for option number `65074`. If such an option exists, it will read DeviceID from there. For this, you can use the `dig` command on the terminal:
+
+```sh
+dig @94.140.14.49 'www.example.com' A IN +ednsopt=65074:3031323334353637
+```
+
+Here, `65074` is the option ID, and `3031323334353637` is its value in hex format (DeviceID: `01234567`).
+
+¡Todo listo! DeviceID should be displayed.
+
+:::note
+
+The `dig` command is merely an example, you can use any DNS software with an ability to add EDNS options to perform this action.
+
+:::
+
 ## Usar DNS simple
 
 Si prefieres no usar software adicional para la configuración de DNS, puedes optar por DNS no encriptado. Tienes dos opciones: usar IPs vinculadas o IPs dedicadas:

i18n/fi/docusaurus-plugin-content-docs/current/private-dns/connect-devices/mobile-and-desktop/linux.md

@@ -102,6 +102,28 @@ If you see a notification that you are not connected to AdGuard DNS, most likely
 
 :::
 
+## Use EDNS (Extended DNS)
+
+EDNS extends the DNS protocol, enabling larger UDP packets to carry additional data. In AdGuard DNS, it allows passing DeviceID in plain DNS using an extra parameter.
+
+DeviceID, an eight-digit hexadecimal identifier (e.g., `1a2b3c4d`), helps link DNS requests to specific devices. For encrypted DNS, this ID is part of the domain (e.g., `1a2b3c4d.d.adguard-dns.com`). For unencrypted DNS, EDNS is required to transfer this identifier.
+
+AdGuard DNS uses EDNS to retrieve DeviceID by looking for option number `65074`. If such an option exists, it will read DeviceID from there. For this, you can use the `dig` command on the terminal:
+
+```sh
+dig @94.140.14.49 'www.example.com' A IN +ednsopt=65074:3031323334353637
+```
+
+Here, `65074` is the option ID, and `3031323334353637` is its value in hex format (DeviceID: `01234567`).
+
+All done! DeviceID should be displayed.
+
+:::note
+
+The `dig` command is merely an example, you can use any DNS software with an ability to add EDNS options to perform this action.
+
+:::
+
 ## Use plain DNS
 
 If you prefer not to use extra software for DNS configuration, you can opt for unencrypted DNS. You have two choices: using linked IPs or dedicated IPs:

i18n/fr/docusaurus-plugin-content-docs/current/private-dns/connect-devices/mobile-and-desktop/linux.md

@@ -102,6 +102,28 @@ Si vous voyez une notification indiquant que vous n'êtes pas connecté à AdGua
 
 :::
 
+## Use EDNS (Extended DNS)
+
+EDNS extends the DNS protocol, enabling larger UDP packets to carry additional data. In AdGuard DNS, it allows passing DeviceID in plain DNS using an extra parameter.
+
+DeviceID, an eight-digit hexadecimal identifier (e.g., `1a2b3c4d`), helps link DNS requests to specific devices. For encrypted DNS, this ID is part of the domain (e.g., `1a2b3c4d.d.adguard-dns.com`). For unencrypted DNS, EDNS is required to transfer this identifier.
+
+AdGuard DNS uses EDNS to retrieve DeviceID by looking for option number `65074`. If such an option exists, it will read DeviceID from there. For this, you can use the `dig` command on the terminal:
+
+```sh
+dig @94.140.14.49 'www.example.com' A IN +ednsopt=65074:3031323334353637
+```
+
+Here, `65074` is the option ID, and `3031323334353637` is its value in hex format (DeviceID: `01234567`).
+
+C'est fait ! DeviceID should be displayed.
+
+:::note
+
+The `dig` command is merely an example, you can use any DNS software with an ability to add EDNS options to perform this action.
+
+:::
+
 ## Utilisation du DNS simple
 
 Si vous préférez ne pas utiliser de logiciel supplémentaire pour la configuration DNS, vous pouvez opter pour le DNS non chiffré. Vous avez deux choix : utiliser des IP liées ou des IP dédiées :

i18n/hr/docusaurus-plugin-content-docs/current/adguard-home/getting-started.md

@@ -156,7 +156,7 @@ To update AdGuard Home package without the need to use Web API run:
 
 This setup will automatically cover all devices connected to your home router, and you won’t need to configure each of them manually.
 
-1. Open the preferences for your router. Usually, you can access it from your browser via a URL, such as http://192.168.0.1/ or http://192.168.1.1/. You may be prompted to enter a password. If you don’t remember it, you can often reset the password by pressing a button on the router itself, but be aware that if this procedure is chosen, you will probably lose the entire router configuration. If your router requires an app to set it up, please install the app on your phone or PC and use it to access the router’s settings.
+1. Open the preferences for your router. Usually, you can access it from your browser via a URL, such as <http://192.168.0.1/> or <http://192.168.1.1/>. You may be prompted to enter a password. If you don’t remember it, you can often reset the password by pressing a button on the router itself, but be aware that if this procedure is chosen, you will probably lose the entire router configuration. If your router requires an app to set it up, please install the app on your phone or PC and use it to access the router’s settings.
 
 2. Find the DHCP/DNS settings. Look for the DNS letters next to a field that allows two or three sets of numbers, each divided into four groups of one to three digits.
 

i18n/hr/docusaurus-plugin-content-docs/current/private-dns/connect-devices/mobile-and-desktop/linux.md

@@ -102,6 +102,28 @@ If you see a notification that you are not connected to AdGuard DNS, most likely
 
 :::
 
+## Use EDNS (Extended DNS)
+
+EDNS extends the DNS protocol, enabling larger UDP packets to carry additional data. In AdGuard DNS, it allows passing DeviceID in plain DNS using an extra parameter.
+
+DeviceID, an eight-digit hexadecimal identifier (e.g., `1a2b3c4d`), helps link DNS requests to specific devices. For encrypted DNS, this ID is part of the domain (e.g., `1a2b3c4d.d.adguard-dns.com`). For unencrypted DNS, EDNS is required to transfer this identifier.
+
+AdGuard DNS uses EDNS to retrieve DeviceID by looking for option number `65074`. If such an option exists, it will read DeviceID from there. For this, you can use the `dig` command on the terminal:
+
+```sh
+dig @94.140.14.49 'www.example.com' A IN +ednsopt=65074:3031323334353637
+```
+
+Here, `65074` is the option ID, and `3031323334353637` is its value in hex format (DeviceID: `01234567`).
+
+All done! DeviceID should be displayed.
+
+:::note
+
+The `dig` command is merely an example, you can use any DNS software with an ability to add EDNS options to perform this action.
+
+:::
+
 ## Use plain DNS
 
 If you prefer not to use extra software for DNS configuration, you can opt for unencrypted DNS. You have two choices: using linked IPs or dedicated IPs:

i18n/it/docusaurus-plugin-content-docs/current/private-dns/connect-devices/mobile-and-desktop/linux.md

@@ -102,6 +102,28 @@ Se vedi una notifica che non sei connesso a AdGuard DNS, molto probabilmente la
 
 :::
 
+## Use EDNS (Extended DNS)
+
+EDNS extends the DNS protocol, enabling larger UDP packets to carry additional data. In AdGuard DNS, it allows passing DeviceID in plain DNS using an extra parameter.
+
+DeviceID, an eight-digit hexadecimal identifier (e.g., `1a2b3c4d`), helps link DNS requests to specific devices. For encrypted DNS, this ID is part of the domain (e.g., `1a2b3c4d.d.adguard-dns.com`). For unencrypted DNS, EDNS is required to transfer this identifier.
+
+AdGuard DNS uses EDNS to retrieve DeviceID by looking for option number `65074`. If such an option exists, it will read DeviceID from there. For this, you can use the `dig` command on the terminal:
+
+```sh
+dig @94.140.14.49 'www.example.com' A IN +ednsopt=65074:3031323334353637
+```
+
+Here, `65074` is the option ID, and `3031323334353637` is its value in hex format (DeviceID: `01234567`).
+
+Tutto fatto! DeviceID should be displayed.
+
+:::note
+
+The `dig` command is merely an example, you can use any DNS software with an ability to add EDNS options to perform this action.
+
+:::
+
 ## Usa DNS semplice
 
 Se preferisci non utilizzare software aggiuntivo per la configurazione DNS, puoi optare per DNS non crittografati. Hai due opzioni: utilizzare IP collegati o IP dedicati:

i18n/ja/docusaurus-plugin-content-docs/current/private-dns/connect-devices/mobile-and-desktop/android.md

@@ -5,7 +5,7 @@ sidebar_position: 2
 
 To connect an Android device to AdGuard DNS, first add it to _Dashboard_:
 
-1. Go to _Dashboard_ and click _Connect new device_.
+1. _ダッシュボード_に移動し、「_新しいデバイスを接続_」をクリックします。
 2. In the drop-down menu _Device type_, select Android.
 3. Name the device.
    ![Connecting device \*mobile\_border](https://cdn.adtidy.org/content/kb/dns/private/new_dns/connect/android_ab/choose_android.png)

i18n/ja/docusaurus-plugin-content-docs/current/private-dns/connect-devices/mobile-and-desktop/ios.md

@@ -5,7 +5,7 @@ sidebar_position: 3
 
 To connect an iOS device to AdGuard DNS, first add it to _Dashboard_:
 
-1. Go to _Dashboard_ and click _Connect new device_.
+1. _ダッシュボード_に移動し、「_新しいデバイスを接続_」をクリックします。
 2. In the drop-down menu _Device type_, select iOS.
 3. Name the device.
    ![Connecting device \*mobile\_border](https://cdn.adtidy.org/content/kb/dns/private/new_dns/connect/ios_ab/choose_ios.png)

i18n/ja/docusaurus-plugin-content-docs/current/private-dns/connect-devices/mobile-and-desktop/linux.md

@@ -5,7 +5,7 @@ sidebar_position: 6
 
 To connect a Linux device to AdGuard DNS, first add it to _Dashboard_:
 
-1. Go to _Dashboard_ and click _Connect new device_.
+1. _ダッシュボード_に移動し、「_新しいデバイスを接続_」をクリックします。
 2. In the drop-down menu _Device type_, select Linux.
 3. Name the device.
    ![Connecting device \*mobile\_border](https://cdn.adtidy.org/content/kb/dns/private/new_dns/connect/choose_linux.png)
@@ -102,6 +102,28 @@ If you see a notification that you are not connected to AdGuard DNS, most likely
 
 :::
 
+## Use EDNS (Extended DNS)
+
+EDNS extends the DNS protocol, enabling larger UDP packets to carry additional data. In AdGuard DNS, it allows passing DeviceID in plain DNS using an extra parameter.
+
+DeviceID, an eight-digit hexadecimal identifier (e.g., `1a2b3c4d`), helps link DNS requests to specific devices. For encrypted DNS, this ID is part of the domain (e.g., `1a2b3c4d.d.adguard-dns.com`). For unencrypted DNS, EDNS is required to transfer this identifier.
+
+AdGuard DNS uses EDNS to retrieve DeviceID by looking for option number `65074`. If such an option exists, it will read DeviceID from there. For this, you can use the `dig` command on the terminal:
+
+```sh
+dig @94.140.14.49 'www.example.com' A IN +ednsopt=65074:3031323334353637
+```
+
+Here, `65074` is the option ID, and `3031323334353637` is its value in hex format (DeviceID: `01234567`).
+
+All done! DeviceID should be displayed.
+
+:::note
+
+The `dig` command is merely an example, you can use any DNS software with an ability to add EDNS options to perform this action.
+
+:::
+
 ## Use plain DNS
 
 If you prefer not to use extra software for DNS configuration, you can opt for unencrypted DNS. You have two choices: using linked IPs or dedicated IPs:

i18n/ja/docusaurus-plugin-content-docs/current/private-dns/connect-devices/mobile-and-desktop/macos.md

@@ -5,7 +5,7 @@ sidebar_position: 4
 
 To connect a macOS device to AdGuard DNS, first add it to _Dashboard_:
 
-1. Go to _Dashboard_ and click _Connect new device_.
+1. _ダッシュボード_に移動し、「_新しいデバイスを接続_」をクリックします。
 2. In the drop-down menu _Device type_, select Mac.
 3. Name the device.
    ![Connecting\_device \*mobile\_border](https://cdn.adtidy.org/content/kb/dns/private/new_dns/connect/mac_ab/choose_mac.png)

i18n/ja/docusaurus-plugin-content-docs/current/private-dns/connect-devices/mobile-and-desktop/windows.md

@@ -5,7 +5,7 @@ sidebar_position: 5
 
 To connect an iOS device to AdGuard DNS, first add it to _Dashboard_:
 
-1. Go to _Dashboard_ and click _Connect new device_.
+1. _ダッシュボード_に移動し、「_新しいデバイスを接続_」をクリックします。
 2. In the drop-down menu _Device type_, select Windows.
 3. Name the device.
    ![Connecting\_device \*mobile\_border](https://cdn.adtidy.org/content/kb/dns/private/new_dns/connect/windows_ab/choose_windows.png)