This is a library for the ST VL6180X component.
The SE868-AS is a GPS Smart antenna module featuring an embedded antenna with an optimized RF path and standard SMT mounting.
The SE868-AS features an 11 x 11 mm QFN package based on a low-power consumption MT3337 GPS chipset and an embedded 9x9mm antenna on top of the module.
The SE868-AS is designed to track and navigate GPS and QZSS constellations, giving the positioning data though standard UART at a very low power rate.
The SE868-AS provides customers customers with a seamless integration solution, whether the RF chain is subject to several constraints in terms of host PCB or if a preassembled antenna solution is required.
The SE868-AS module has the same form, fit, and protocol as its multi-constellation counterpart, the SE868-A. This enables integrators and developers to design their applications once and take advantage of the flexibility afforded by the combination of the different and scalable GNSS technologies.
The Jupiter SE868-AS, with its companion multi-GNSS module SE868-A, extends the Telit smart antenna portfolio and provides the optimum mix of performances, cost and product scalability.
The Jupiter SE868-AS supports ephemeris file injection (A-GPS) as well as Satellite Based Augmentation System (SBAS) to increase position accuracy. Its onboard software engine is able to locally predict ephemeris up to three days in advance, starting from ephemeris data broadcast by GNSS satellites received by the module. An external or host memory is required to store the Ephemeris files.
It was principally designed to work with the SmartEverything board, but could be easily adapt and use on every Arduino and Arduino Certified boards.
- /examples - Example sketches for the library (.ino). Run these from the Arduino IDE.
- /src - Source files for the library (.cpp, .h).
- library.properties - General library properties for the Arduino package manager.
- Enachement:
Unlocked the library from the SME specific UART. The User can change the serial at the begin() method.
- Fixed Issue:
Added examples and API to trigger GPS module power status. This can be useful to reduce power consumption
.
- Installing an Arduino Library Guide - How to install a SmartEverything library on the Arduino IDE using the Library Manager
Copyright (c) Amel Technology. All right reserved.
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA