Add changes as per linter

src/com/vga/vga.sv

@@ -9,26 +9,26 @@ import pkg::*;
 
 module vga #(
         // Screen informations
-        parameter int unsigned WIDTH = 800,   // Screen width (pixels)
-        parameter int unsigned HEIGHT = 600,  // Screen height (pixels)
-
-        // Vertical timings
-        parameter int unsigned VERT_FPORCH = 37,  // Vertical front porch (lines)
-        parameter int unsigned VERT_SYNC = 6,     // Vertical synchronization (lines)
-        parameter int unsigned VERT_BPORCH = 23,  // Vertical back porch (lines)
+        parameter int unsigned H_SIZE = 800,    // Screen width (pixels)
+        parameter int unsigned V_SIZE = 600,    // Screen height (pixels)
 
         // Horizontal timings
-        parameter int unsigned HORI_FPORCH = 56,  // Horizontal front porch (pixels)
-        parameter int unsigned HORI_SYNC = 120,   // Horizontal synchronization (pixels)
-        parameter int unsigned HORI_BPORCH = 64   // Horizontal bock porch (pixels)
+        parameter int unsigned H_FP = 56,       // Horizontal front porch (pixels)
+        parameter int unsigned H_SYNC = 120,    // Horizontal synchronization (pixels)
+        parameter int unsigned H_BP = 64        // Horizontal bock porch (pixels)
+
+        // Vertical timings
+        parameter int unsigned V_FP = 37,       // Vertical front porch (lines)
+        parameter int unsigned V_SYNC = 6,      // Vertical synchronization (lines)
+        parameter int unsigned V_BP = 23,       // Vertical back porch (lines)
 )(
         input pixelclk,         // Screen specific pixelclock
         input rst,              // Reset
         input color_t color_in, // Color for current pixel
 
         // Next pixel's coordinates
-        output [$clog2(WIDTH) - 1 : 0] pix_x,
-        output [$clog2(HEIGHT) - 1 : 0] pix_y,
+        output [$clog2(H_SIZE) - 1 : 0] pix_x,
+        output [$clog2(V_SIZE) - 1 : 0] pix_y,
 
         output color_t color_out,   // VGA color output
 
@@ -38,12 +38,12 @@ module vga #(
     );
 
     // Total frame dimensions
-    localparam int unsigned FULL_LINE = WIDTH + HORI_FPORCH + HORI_SYNC + HORI_BPORCH;      // Max line length
-    localparam int unsigned FULL_FRAME = HEIGHT + VERT_FPORCH + VERT_SYNC + VERT_BPORCH;    // Max frame height
+    localparam int unsigned FullHSize = H_SIZE + H_FP + H_SYNC + H_BP;  // Max line length
+    localparam int unsigned FullVSize = V_SIZE + V_FP + V_SYNC + V:BP;  // Max frame height
 
     // Current cursor position
-    reg [$clog2(FULL_LINE) - 1 : 0] c_pix_x;
-    reg [$clog2(FULL_FRAME) - 1 : 0] c_pix_y;
+    reg [$clog2(FullHSize) - 1 : 0] c_pix_x;
+    reg [$clog2(FullVSize) - 1 : 0] c_pix_y;
 
     // Sequential process for updating pixels
     always @(posedge pixelclk, posedge rst) begin
@@ -55,23 +55,23 @@ module vga #(
             c_pix_x ++; // Increase the pixel x position by 1
 
             // Check if the pixel x position is greater than a full line
-            if (c_pix_x >= FULL_LINE) begin
+            if (c_pix_x >= FullHSize) begin
                 c_pix_x = 0;    // Reset the current pixel on the x position
                 c_pix_y ++;     // Increase the current y position by 1
             end
 
             // Check if the pixel y position is greater than a full frame
-            if (c_pix_y >= FULL_FRAME) begin
+            if (c_pix_y >= FullVSize) begin
                 c_pix_y = 0;    // Reset the current pixel on the y position
             end
 
             // Check if the pixel is in the visible area
-            if ((c_pix_x < WIDTH) && (c_pix_y < HEIGHT)) begin
+            if ((c_pix_x < H_SIZE) && (c_pix_y < V_SIZE)) begin
                 color_out = color_in;   // Output the color to vga
 
                 // Output the next pixel
-                pix_x = c_pix_x+1;  // Output the x component
-                pix_y = c_pix_y+1;  // Output the y component
+                pix_x = c_pix_x + 1;  // Output the x component
+                pix_y = c_pix_y + 1;  // Output the y component
             end else begin
                 color_out = '0; // Set the color to black
 
@@ -81,14 +81,14 @@ module vga #(
             end
 
             // Check if the vertical synchronisation should be active
-            if ((c_pix_y > (HEIGHT + VERT_FPORCH)) && (c_pix_y < (HEIGHT + VERT_FPORCH + VERT_SYNC))) begin
+            if ((c_pix_y > (H_SIZE + V_FP)) && (c_pix_y < (H_SIZE + V_FP + V_SYNC))) begin
                 vga_vsync = 1;  // Set the vertical sync to 1
             end else begin
                 vga_vsync = 0;  // Set the vertical sync to low
             end
 
             // Check if the horizontal synchronisation should be active
-            if ((c_pix_x > (WIDTH + HORI_FPORCH)) && (c_pix_x < (WIDTH + HORI_FPORCH + HORI_SYNC))) begin
+            if ((c_pix_x > (H_SIZE + H_FP)) && (c_pix_x < (H_SIZE + H_FP + H_SYNC))) begin
                 vga_hsync = 1;  // Set the horizontal synchronisation to 1
             end else begin
                 vga_hsync = 0;  // Set the horizontal synchronisation to low