Update README.md

README.md

@@ -1,5 +1,40 @@
 # DRV8835HB01B 
 
-H-bridge-based ICs DRV8835HB. Allows you to control two DC motors in the range voltage 2V to 11V and maximum current of 1.5 A on the engine, or parallel, where it is then possible to control the 3A engine. Or the module can be used to control a stepper motor.
+## Description
+The DRV8835 provides an integrated motor driver solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications. It features two H-bridge drivers capable of driving two DC motors or one stepper motor. The output driver block for each consists of N-channel power MOSFETs configured as an H-bridge. An internal charge pump generates gate drive voltages, and it includes protection features for overcurrent, short circuit, undervoltage lockout, and overtemperature. 
 
-            
+The module can be used to control a stepper motor.
+
+## Features
+- Dual H-Bridge Motor Driver capable of driving:
+  - Two DC Motors or
+  - One Stepper Motor
+- Low MOSFET ON-Resistance: HS + LS 305 mΩ
+- 1.5-A Maximum Drive Current per H-Bridge
+- Bridges can be configured in parallel for up to 3-A Drive Current
+- Separate motor (0-V to 11-V) and logic (2-V to 7-V) supply pins
+- Flexible PWM or PHASE/ENABLE Interface
+- Low-Power Sleep Mode with 95-nA Maximum Supply Current
+
+## Applications
+Ideal for battery-powered applications such as:
+- Cameras
+- DSLR Lenses
+- Consumer Products
+- Toys
+- Robotics
+- Medical Devices
+
+
+## Setup and Configuration
+1. **Power Supply**:
+   - Ensure that the VCC is connected to a 2 V to 7 V supply.
+   - Connect VM to a supply voltage between 0 V and 11 V depending on the required motor voltage.
+2. **Input Configuration**:
+   - The default mode (IN/IN) is selected by setting MODE to low or leaving it unconnected.
+   - Switch to PHASE/ENABLE mode by setting MODE to high.
+3. **Sleep Mode**:
+   - Enter low-power sleep mode by setting all inputs to low (0 V).
+
+## Documentation and Support
+- For detailed device specifications and setup instructions, refer to the DRV8835 datasheet available at [Texas Instruments Product Page](http://www.ti.com/product/drv8835).