[WIP] [DNM]Test udn ns label merge #2414
Conversation
Handle host-network pods as default network. Don't return per-pod errors on startup. Remove nadController from UDNHostIsolationManager as we don't use it anymore to find pod's UDN based on NADs that exist in the namespace. Signed-off-by: Nadia Pinaeva <[email protected]>
Signed-off-by: Jaime Caamaño Ruiz <[email protected]>
udn host isolation: fix initialSync.
…face Signed-off-by: Martin Kennelly <[email protected]>
This code isnt being used anymore. We dont expect users to upgrade directly from code which contained the legacy LRPs, therefore its safe to remove. Signed-off-by: Martin Kennelly <[email protected]>
Signed-off-by: Martin Kennelly <[email protected]>
L2 UDN: EgressIP hosted by primary interface (`breth0`)
If EncapIP is configured, it means it is different from the node's primary address. Do not update EncapIP when node's primary address changes. Signed-off-by: Yun Zhou <[email protected]>
Assign network ID from network manager running in cluster manager. The network ID is included in NetInfo and annotated on the NAD along with the network name. Network managers running in zone & node controllers will read the network ID from the annotation to set it on NetInfo. On startup, network manager running in cluster manager will read the network IDs annotated on the nodes to cover for the upgrade scenario. Network IDs will still be annotated on the nodes because this PR does not transition all the code to use the network ID from the NetInfo instead of the node annotation. That will have to be done progressively. This have several benefits, among them: - NetworkID is available sooner overall since we dont have to wait for all the nodes to be annotated - No need to unmarshall the node annotation to get the network IDs, they are available in NetInfo - No need to unmashall the NAD to get the network name, can be accessed directly from the annotation. If a network is replaced with a different one with the same name, the network ID is reused as the respective network controller will not start as the previous one is stopped and cleaned up so it shouldn't be a problem. Signed-off-by: Jaime Caamaño Ruiz <[email protected]>
Instead of considering managed VRFs those that follow the mp<id>-udn-vrf naming template, use the table number: those vrfs associated to a table within our reserved block of table numbers are managed by us. The block right now is anything higher than RoutingTableIDStart (1000). This allows to manage VRFs with any name which is desirable if the name is going to be exposed through BGP. Signed-off-by: Jaime Caamaño Ruiz <[email protected]>
Anticipating that these VRF names are going to be exposed through BGP, we should to use friendlier names for our VRFs. The most natural name to use is the network name. Thus giving a cluster UDN a name below 15 characters that matches an already existing VRF not managed by ovn-k will fail. This is considered an admin problem and not an ovn-k problem for now. Signed-off-by: Jaime Caamaño Ruiz <[email protected]>
Signed-off-by: Jaime Caamaño Ruiz <[email protected]>
Signed-off-by: Jaime Caamaño Ruiz <[email protected]>
Signed-off-by: Jaime Caamaño Ruiz <[email protected]>
Was causing deadlocks in unit tests Signed-off-by: Jaime Caamaño Ruiz <[email protected]>
…heir subcontrollers Signed-off-by: Jaime Caamaño Ruiz <[email protected]>
Signed-off-by: Jaime Caamaño Ruiz <[email protected]>
Assuming that there is three types of controllers, being: network agnostic, network aware and network specific; we were already notifying network specific controllers of network changes. But network aware controllers, controllers for which we have a single instance capable of managing multiple networks, had no code path to be informed of netwokr changes. This commit adds a code path for that and makes the RouteAdvertisments controller aware of network changes. Changed ClusterManager to be the controller manager for cluster manager instead of secondaryNetworkClusterManager. It just makes more sense that way sice ClusterManager is the top level manager. Signed-off-by: Jaime Caamaño Ruiz <[email protected]>
Signed-off-by: Jaime Caamaño Ruiz <[email protected]>
…twork exist test Signed-off-by: Or Mergi <[email protected]>
On CUDN cleanup is inconsistent as we see some flaky tests due to CUDN "already exist" errors, implying object are not actually deleted. Wait for CUDN object be gone when deleted Signed-off-by: Or Mergi <[email protected]>
CUDN is cluster-scoped object, in case tests running in parallel, having random names avoids conflicting with other tests. Use random metadata.name for CUDN objects. The "isolates overlapping CIDRs" tests create objects based on the 'red' and 'blue' variables, including CUDN objects. Change the tests CUDN creation use random names and update the given 'networkAttachmentConfigParams' with the new generated name. Update 'red' & 'blue' vaiables with the generated name, carried by 'networkAttachmentConfigParams' (netConfig.name). The pod2Egress tests asserts on the CUDN object name given by 'userDefinedNetworkName'. In practice the tests netConfigParam.name is userDefinedNetworkName. Change the assertion to check the given netConfigParam. Signed-off-by: Or Mergi <[email protected]>
Signed-off-by: nithyar <[email protected]>
Signed-off-by: nithyar <[email protected]>
e2e, CUDN: Improve stability
Reconcile RouteAdvertisements in cluster manager
Add missing enum validation for RouteAdvertisements
The NetPol test checks assigned pod IP only against IPv4 subnet which would fail on IPv6 only cluster. This commit fixes it by checking on all valid CIDRs. Signed-off-by: Periyasamy Palanisamy <[email protected]>
As of today the NetworkReady condition indicated a NAD has been created. And not necessarily that the underlying network is ready to work with, because it require other internal components to act (e.g.: set ovs ports, ovn flows, etc..). Rename the NetworkReady condition type to NetworkCreated so it describe better what it indicates. This change enable introducing alternative "NetworkReady" condition that provider actual indication a UDN network is ready, and that other internal component acted successfully. Signed-off-by: Or Mergi <[email protected]>
The variable ginkgo_focus is misspelled as gingko_focus. As the latter var is not used anywhere else in this repo and is used to concatenate the var ginkgo_focus in the next line to ginkgoargs it seems to be a typo. Fixes: #4942 Signed-off-by: Felix Schumacher <[email protected]>
|
@trozet: The following tests failed, say
Full PR test history. Your PR dashboard. Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository. I understand the commands that are listed here. |
|
@tssurya: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/fc874390-d1df-11ef-9be9-3f1c2f489e8c-0 |
|
@tssurya: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/291f2b10-d1e1-11ef-80eb-5a9fe669093f-0 |
|
@tssurya: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/39c95f80-d1e1-11ef-8e37-6d74b5ecc3a4-0 |
|
@tssurya: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/4639e1e0-d1e1-11ef-95fc-02f63217ccf6-0 |
|
@tssurya: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/5118a0b0-d1e1-11ef-924e-a5d12f299bf9-0 |
|
@tssurya: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/5bdf91c0-d1e1-11ef-9ade-b67ef733a655-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/d2090770-d356-11ef-9c39-2118dcccec7a-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/f96db720-d356-11ef-933f-5e98a4a942f3-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/de8b5490-d38c-11ef-83d3-8788d2970b92-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/ee4ef990-d38c-11ef-9f34-2a6c32dd947c-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417 |
1 similar comment
|
@trozet: This PR was included in a payload test run from openshift/origin#29417 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/649aa2c0-d38d-11ef-9015-cb9b631a4677-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/293007b0-d415-11ef-9188-98fa23df9009-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/34aa6a40-d415-11ef-9742-820cb7fe953e-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/4a66d670-d415-11ef-8bee-9426b528d2aa-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/98779f10-d524-11ef-9798-8032ab0693e0-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/a4cc8320-d524-11ef-8c88-0c02d03b7698-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/75f88580-d5ab-11ef-8bd2-69c2f06893a6-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/7fec2100-d5ab-11ef-86ea-c9dc40168bc5-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/02d3a360-d74e-11ef-8630-5d1180a25ebe-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/15711c50-d74e-11ef-8be3-2aabce8e4ae3-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/61ed1e90-d775-11ef-959a-f9c44b8972e9-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/6792e3c0-d775-11ef-96e9-9d78b7a7cd83-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/3bc17300-d794-11ef-8664-0785553427de-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/41f3c0c0-d794-11ef-9959-2bf9f3271c30-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/d2ad9f20-d828-11ef-9956-66ccf99d9085-0 |
|
@trozet: This PR was included in a payload test run from openshift/origin#29417
See details on https://pr-payload-tests.ci.openshift.org/runs/ci/d9e21aa0-d828-11ef-81d5-9d0d46ebeb89-0 |
📑 Description
Fixes #
Additional Information for reviewers
✅ Checks
How to verify it