pi500-v1.1

Pi500 v1.1 UF2 binaries and updater script

An update to the Pi 500 keyboard firmware. This is mostly just a clean up of the code. One change is to check the power key status on power up and enter RPIBOOT mode if the power key is pressed.

pi500-keyboard-fw-update - combined recovery image
Rescue image for Pi500 QMK development e.g. if one or both of the firmware images not working
Buildroot source: https://github.com/raspberrypi/buildroot/tree/pi500-keyboard-fw-update

• Flash to a spare SD card using the Raspberry Pi Imager
• Boot the Pi500 and wait (for at least 1 minute) until a Linux console appears with a message prompting you eject the SD card and reboot.

pi500-v1.0

Pi500 v1.0 UF2 binaries and updater script - require local install of picotool.

pi500-keyboard-fw-update - combined recovery image
Rescue image for Pi500 QMK development e.g. if one or both of the firmware images not working
Buildroot source: https://github.com/raspberrypi/buildroot/tree/pi500-keyboard-fw-update

• Flash to a spare SD card using the Raspberry Pi Imager
• Boot the Pi500 and wait (for at least 1 minute) until a Linux console appears with a message prompting you eject the SD card and reboot.