Pull from Docker Hub

Mikrotik settings

Подробная инструкция настройки Mikrotik habr.ru или web.archive.org (на обоих ресурсах доступно только из-за границы)

---

/interface/bridge add name=Bridge-Docker port-cost-mode=short
/ip/address add address=192.168.254.1/24 interface=Bridge-Docker network=192.168.254.0
/interface/veth add address=192.168.254.2/24 gateway=192.168.254.1 name=BYEDPI-TUN
/interface/bridge/port add bridge=Bridge-Docker interface=BYEDPI-TUN

change path /usb1 to your actual path

/container/config set registry-url=https://registry-1.docker.io tmpdir=/usb1/docker/pull 

/container/add remote-image=wiktorbgu/byedpi-hev-socks5-tunnel:mikro interface=BYEDPI-TUN cmd="--disorder 1 --auto=torst --tlsrec 1+s" root-dir=/usb1/docker/byedpi-hev-socks5-tunnel-mikro start-on-boot=yes

Table routing

/routing/table add disabled=no fib name=dpi_mark 

/ip/route add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.254.2%Bridge-Docker pref-src="" routing-table=dpi_mark scope=30 suppress-hw-offload=no target-scope=10

Route address list to BYEDPI TUNNEL

/ip firewall mangle add action=mark-routing chain=prerouting comment="List DNS FWD route to byedpi tunnel" dst-address-list=za_dpi_FWD in-interface-list=LAN new-routing-mark=dpi_mark passthrough=no

RUN container and enjoy! =)

/container start [find interface=BYEDPI-TUN]