Skip to content

Archetype Bill of materials

Jump to bottom Edit New page
Alex Lennon edited this page May 29, 2018 · 1 revision

These are costs stated in emails from Andy in Feb/Aug 2015.

Part description cost
Frame 10m cut steel welded £400
chrome shafts 2x 35mm shafts £50
Z axis rail length 234mm + 2 carriages £83.12
Z-bearing Thrust driver pulleys £100
X and Y axis 2 Ball screws £403.20
ball screw covers 6 spiral springs £322.39
shell bearings 4 from Brammer 3535DU £41.06
Bearing blocks 8 off 40x25x60 2 off 40x20x50 £40
Angular Contact bearings Brammer SKF 7201BEP 40deg £84
gear pulleys+belts Davall 2 off 32-3MR-9, 2 off 44-3MR-9, 2 off 3MR-240-09 £73.08
spindle high speed ER16 £275.00
inverter Fuji Single Phase £197.00
Line Filter £19.28
servo motors 2x 30PL082, 1x 30PM069, encoders, drivers £1028.05
switches limit end stop sleeving £39.40
Total £3300

Quick Links: Website • Groups • Rooms • Equipment • Issue Tracker • Discussion Group • Image Credits

☝️ Filter all pages above!
(Full search available on the top of page)

WiFi: DoES Liverpool, password: decafbad00

or

Clone this wiki locally