CutEtchSettingsGerald

Cut/Etch Settings Gerald

3040 (tube)

Cut/Etch Settings	Etch Speed	Etch power	Cut speed	Cut power(/corner)	Date last confirmed
3mm Birch Plywood			10	70 (60)	(19/3/2014)
6mm Poplar Plywood (from Material World)	250	25	5	70 (60)	(16/04/2019)
3mm Acrylic			10	70 (70)
1.3mm Mountboard (bought downstairs)			70	60 (60)
1.5mm Laminated Perspex (AMc's Tested Settings - etches through to next colour)	200	15	25	50(30)
24mm Plastazote Foam	250	25	18	70(70)
General Walnut veneer			50	22
Fine Detail Walnut veneer			25	20
6mm MDF			4	50 (40)	11/4/2014
10mm circa Slate	200	24 (20)			23/4/2014
5.50-5.75mm Carpet (The best result with carpet has been obtained with two cutting passes. One with speed set to 20 and a second one with speed set to 10)			20 and 10	70 (60)	28/4/2014
2mm HIPS High Impact Polystyrene			5	22(12)	5/5/2014
2mm Acetal (Delrin)	250	40	18	70 (70)
3.5mm corrugated cardboard			75	70 (60)
1.5mm Polypropylene (Celebrations tub)			25	70 (65)
0.7mm Polypropylene			30	35 (30)
3mm Polypropylene (Polystone)			5	70 (65)
1mm PETG			45	70 (70)
1.5 mm Grip Tape			50	70(60)	03/07/2021